All Installation Instructions for Whirlpool Range ACR4303MFW5

could not control temp on burner

Took appro 8 screws out of back panel, 2 screws holding switch, and pulled out switch, unhooked wires and reinstalled wires on new switch. Had to snap off stem with needle nose pliers which is simple and put everything back in place in reverse order!

Parts Used:

Surface Burner Element Switch, Large Burner

Ernie from Cameron, MO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

Was this instruction helpful to you?

Front large burner stayed on high

i personally did not do the repair..one of my neighbors did it and he said it was super easy..he pulled stove out from wall, unplugged it from socket, removed defective part, shortened clip that knob attaches to, installed new part with no problems whatsoever...plugged stove back in, pushed it back in place...burner now works fine! i was super impressed with the delivery of this part...ordered it on a Monday nite, it was mailed out the next day (Tuesday), and i received it Wednesday around noontime.. :)

Parts Used:

Surface Burner Element Switch, Large Burner

Lynn C from Leesburg, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

I had a power serge and it burned the Plug at the termial block and melted a few wire.

After we got the part in the mail my husband put it on and shortened the wires and put new plugs on the ends of the wires and we had to get a new plug put it on and it was fixed.

Parts Used:

Range Terminal Block

Robin from Vanderbilt, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

Was this instruction helpful to you?

Replacing the Upper Spray Arm, part # PS2581378

The detection of the part and the replacement of the upper spray arm was quite easy, because of its unique shape and function, and also because it was easy to screw in place. I saved the web order page in case this part tends to deteriorate frequently, even though it is the first time it showed this problem since we purchased this appliance.

Parts Used:

Infinite Switch - 6 Inch

Vittorio from Wakefield, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Old Drip Bowls

Lifted out the old ones and inserted the new ones and my range top looks brand new now!

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

James from Edgewater, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

none

I pulled out the burners, cleaned up the crumbled drip pans ,installed the new drip pans, pluged in the burners and was finished in about 3 minutes. I will order again from you. Thank you.

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Dennis from Viroqua, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

my drip bowls were old an I was unable to clean them

I took the old drip pans out and replace them with the new ones. Now my stove looks brand new. These were a perfect fit.

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Anne Marie from Albany, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Replace drip bowls

I took the old bowls out and dropped the new bowls in. No problem.

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Marilyn from Kings Park, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Generic Drip Bowls Made The Burners Tilt.

Pulled out the generics and popped in the correct bowls for my whirlpool. Done in less than 10 minutes and perfecto,. . . Level burners :-) thanks we'll be back when we need you again.

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

PATRICIA*NAYLOR from NEW PRT RCHY, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Wrong replacement Drip Pans installed previously caused damge to 8" Burner.

Removed burners and drip pans, replaced drip pans and re-installed burners. Simple....

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Lloyd from Pinellas Park, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

burner would go red after a few mintes

put it off a week before i worked on it but if you can replace a plug on a excord you can do this less than 5 mins

Parts Used:

Surface Burner Element Switch, Large Burner

richard from pottsville, AR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers

Was this instruction helpful to you?

Replace bowls

Removed old bowls and replaced with new ones. Easy. Piece of cake. Perfect fit.thanks.

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Judy from Indianapolis, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Oven shutting off after temp reached 350

Remove the plug from outlet then shutoff gas. Remove the 10 screws hold the back panel of the oven. Unclip the connector of the temperature sensor from the main line. Pull the sensor straightout. Reverse the process install the new sensor. Couldn't be any easier. Oven working great. Calling in a reapairman would have cost $200 for parts and labor.

Parts Used:

Oven Sensor

Ken from Las Cruces, NM
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

old bowls could not be cleaned. These new bowls make the stove look great

Removed old bowls and replaced with the new bowls. Also, thanks for your help with the rang knobs. You did not have the replacement knobs for my range but you gave me help in where I might get them. With the new bowls and knobs the range looks like new. Thanks again for all your help.

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch