All Installation Instructions for Amana Range ACR4203MNB1

none

I pulled out the burners, cleaned up the crumbled drip pans ,installed the new drip pans, pluged in the burners and was finished in about 3 minutes. I will order again from you. Thank you.

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Dennis from Viroqua, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Element burned out

Element burned out, ordered from Sears. Took over 2 weeks to get, originally sent wrong burner then shipped second one to wrong address. When I installed element I found that switch was also burned out . I ordered it from Parts Select & it was in the stove in 24 hours from the time I ordered it on line. Be assured I know where I will order my parts from now on

Parts Used:

Surface Burner Element Switch, Large Burner

Francis E from Harwich, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Burner light was on all the time but burner was off.

Replaced the burner switch.

Parts Used:

Surface Burner Element Switch, Large Burner

Cliffford from Rochester, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

my drip bowls were old an I was unable to clean them

I took the old drip pans out and replace them with the new ones. Now my stove looks brand new. These were a perfect fit.

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Anne Marie from Albany, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

old bowls could not be cleaned. These new bowls make the stove look great

Removed old bowls and replaced with the new bowls. Also, thanks for your help with the rang knobs. You did not have the replacement knobs for my range but you gave me help in where I might get them. With the new bowls and knobs the range looks like new. Thanks again for all your help.

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Gerald from Rochester, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Replace drip bowls

I took the old bowls out and dropped the new bowls in. No problem.

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Marilyn from Kings Park, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

broken burner switch

Easy as pie! Thank you for the illustration to help us pick out the correct part.

Parts Used:

Infinite Switch - 6 Inch

Coral from Duluth, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Drip plans needed replacement

Removed old ones replaced with new oned

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Margaret from Vero Beach, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

replacement drip pans didn't fit -- wrong type

Purchased appropriate drip pans here. They arrived overnight, much to our surprise! The range elements were easy to remove, and the drip pans fit precisely as they were designed to do. Ta Da! repair completed.

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Rev Connie from Mattawan, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

burner would go red after a few mintes

put it off a week before i worked on it but if you can replace a plug on a excord you can do this less than 5 mins

Parts Used:

Surface Burner Element Switch, Large Burner

richard from pottsville, AR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers

Was this instruction helpful to you?

Not heating properly.

Removed rear panel and removed switch. I placed wires from old switch to the new one. re installed switch an back panel.

Parts Used:

Infinite Switch - 6 Inch

Joseph R. from Candia, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Stove kept turning off

Looked up on-line the error problem and what part I needed to fix it. Part arrived very quickly and everything was going fine until I realized the stove had two sensors. Replaced the top sensor now I am getting an error on the bottom sensor. Maybe I replaced the wrong one. I will replace the bottom sensor with the one I took out and see if that does the trick. Very very satisfied with PartsSelect. Good Price, Quick Shipping, Would do business with them again. They are now in my favorites so I can find them again if I need parts.

Parts Used:

Oven Sensor

Richard from Wooster, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Wrong replacement Drip Pans installed previously caused damge to 8" Burner.

Removed burners and drip pans, replaced drip pans and re-installed burners. Simple....

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Lloyd from Pinellas Park, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Generic Drip Bowls Made The Burners Tilt.

Pulled out the generics and popped in the correct bowls for my whirlpool. Done in less than 10 minutes and perfecto,. . . Level burners :-) thanks we'll be back when we need you again.

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch