ACC108PS0 Whirlpool Air Conditioner - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
A/C board had corrosion on it
First I unplugged the A/C. Then I removed the two screws from the front cover. Next, I removed the srews holding the front board. Then I removed the screws from the metal box which house the second board. Removed the second board and replaced with the new one. Final I did the same process backward. Less than fifteen minutes from beginning to end. Plugged the A/C in and turned it on. It's been work fine since.
Parts Used:
-
Shawn from Bridgewater, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!