ABB222ZDEQ Amana Refrigerator - Parts

This center crisper drawer rail supports the edges of refrigerator crisper drawers, ensuring smooth sliding and proper alignment. At 13.5 inches long, it fits between the drawers on the shelf frame. Quick and easy to install, this replacement restores stability and functionality to the crisper drawer system.

This shelf frame is an essential component for maintaining the organization and functionality of your refrigerator’s crisper or pantry area. It serves as the sturdy base for the glass shelf above the drawer, helping to keep produce and other items neatly stored. Designed to fit a variety of refrigerator models, the frame is built for long...Read more-lasting use. Please be aware that this item includes only the frame; the glass insert and center support are sold separately. Installation is simple and typically requires no tools—just slide the frame into place to restore your fridge’s storage setup.

This modular ice maker assembly replaces worn-out units to restore ice production in refrigerators. It includes the ice mold and control device but excludes the cover, ice level arm, wire harness, and mounting hardware, which must be reused or ordered separately. Unplug the refrigerator before installation and use work gloves for safety. Check compatibility with your model number before purchase.

Door switch turns the light off when you close the door.

This electronic control board is a critical component in refrigerator systems, responsible for regulating temperature settings and managing cooling and defrost cycles. If your appliance is experiencing issues such as inconsistent temperatures, failure to start, prolonged operation, or ineffective defrosting, replacing the control board ma...Read morey resolve the problem. Installation requires a small flat blade screwdriver and should be performed with the refrigerator unplugged to ensure safety. Please note that this board must be programmed after installation to function correctly. For precise installation steps and programming instructions, refer to the manufacturer’s manual specific to your refrigerator model.

Sold individually. Crisper drawer is an original equipment manufacturer (OEM) part that fits some bottom-freezer Kenmore, Amana, Crosley, Jenn-Air, KitchenAid, Maytag and Whirlpool refrigerators. The crisper drawer is approximately 6-7/8-inches tall, 14-inches wide and 15-inches deep.

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a mounting nut for the blade and a cushion. This part provides forced-air cooling for the condenser coil.

This is a replacement pan glide for your refrigerator. The pan glide can be found attached to the refrigerator shelf, and allows the pan to slide in and out efficiently. If your refrigerator pan will not slide in or out of place properly, or if the pan will not stay in place, you may need to replace the glide. There is a pan glide on the ...Read moreleft and the right side of the refrigerator shelf. This part is the left side glide, so be sure to determine whether you need to replace the left glide or the right glide. This part is made of white plastic, and is approximately 15 inches long.

This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.

This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

This part is snapped onto the top portion of the evaporator. The thermostat sends temperature information to the processor. The defrost heater must be replaced when replacing the thermostat.