Models > A25CA > Parts

A25CA Maytag Washer - Parts

1 - 12 of 217
Keep searches simple, eg. "belt" or "pump".
Belt Kit – Part Number: 12112425
Belt Kit
★★★★★
★★★★★
(24)
PartSelect #: PS2005284
Manufacturer #: 12112425
This kit includes both the drive belt and the pump belt which are both "V" shaped.
$52.60
  In Stock
Mounting Stem/Tub Seal Kit – Part Number: 6-2095720
Mounting Stem/Tub Seal Kit
★★★★★
★★★★★
(11)
PartSelect #: PS2351899
Manufacturer #: 6-2095720
This kit comes with hub assembly, agitator seal and spanner nut. If your washer leaks once full (with or without clothes in it) or leaks during agitation, then you should replace the seal.
$130.98
  On Order
Rubber Injector Valve – Part Number: WP216201
Rubber Injector Valve
★★★★★
★★★★★
(14)
PartSelect #: PS11738945
Manufacturer #: WP216201
This part is commonly known to cause a leak at the top left corner of the outer tub. It fits over the injector nozzle.
$27.19
  In Stock
Water Inlet Valve – Part Number: 205613
Water Inlet Valve
★★★★★
★★★★★
(10)
PartSelect #: PS1583805
Manufacturer #: 205613
This part has two ports for water to enter. It is blue and is intended for use with many washing machines and comes with a multi-mount bracket and an outlet adaptor.
$125.52
  In Stock
Plastic Injector Nozzle – Part Number: WP213015
Plastic Injector Nozzle
PartSelect #: PS11738878
Manufacturer #: WP213015
This injector nozzle is just under three inches long. It is white in color and made entirely of plastic.
$13.20
  In Stock
Tub Bearing Kit – Part Number: 6-2040130
Tub Bearing Kit
★★★★★
★★★★★
(2)
PartSelect #: PS2347235
Manufacturer #: 6-2040130
This kit is used on 2-belt washers. It is recommended to change the seal kit at the same time.
$74.65
  In Stock
Drain Pump – Part Number: WP6-2022030
Drain Pump
★★★★★
★★★★★
(6)
PartSelect #: PS11743017
Manufacturer #: WP6-2022030
This washing machine drain pump is intended for use with automatic washers that have been manufactured since 1958. The pump itself is made of plastic, though it does come with a metallic belt pulley.
$255.89
  In Stock
Damper Pad Kit – Part Number: 203956
Damper Pad Kit
★★★★★
★★★★★
(2)
PartSelect #: PS2017036
Manufacturer #: 203956
This damper pad kit is used for base support. It comes with three six inch damper pads, two little tubes of lubricant. NOTE: This part will need adhesive to stick it in place.
$57.69
  In Stock
Lid Switch Assembly – Part Number: WP22001682
Lid Switch Assembly
★★★★★
★★★★★
(7)
PartSelect #: PS11739302
Manufacturer #: WP22001682
This black lid switch assembly comes complete with a bracket, two switches, and a fuse. An open fuse might indicate that the lid switch is bad. The point of the lid switch is for the tub to stop spin...
$54.09
  In Stock
Lid Check Switch – Part Number: WP207166
Lid Check Switch
★★★★★
★★★★★
(8)
PartSelect #: PS11738787
Manufacturer #: WP207166
This is used to start your washer once the desired water level is reached.
$61.73
  In Stock
Lid Switch – Part Number: W10820036
Lid Switch
★★★★★
★★★★★
(3)
PartSelect #: PS11723153
Manufacturer #: W10820036
This 3 prong lid switch is used for washing machines that do not have a tub light.
$30.21
  In Stock
Hose Clamp – Part Number: WP596669
Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
$11.68
  In Stock
1 - 12 of 217