A207S Maytag Washer - Parts

This Injector hose seal is sold individually. The injector hose is no longer available.

This screw is sold individually.

Requires two washers.

This kit is part of the lid switch mechanism and will stop the spin cycle if the load is unbalanced. When you lift the lid, it resets the plunger and your cycle will resume.

This clip is designed to hold a timer knob in place.

This clamp does include the nuts and bolts to hold it together but it does not include the rubber seal. Sold separately.

This timer knob spring is almost an inch and a half long, and is not quite an inch in diameter. It is made of metal and is used with the timer knobs of both washers and dryers.

This center seal retaining washer is a little over an inch in diameter. It is made of metal.

This two speed split phase washing machine motor performs 1725 revolutions per minute in one speed and 1140 revolutions per minute in the other speed. This motor runs at 1/2 horsepower and it carries 8.0 amps. It's a good idea to change your washer's belts at the same time as you replace this motor, as they may have become worn as well.

10 - 16 x .375

Model Number GB2526REKS : SCR