A108 Washer - Parts

This helps turn the pump and to help make the washer agitate properly. It is generally positioned between the motor and the pump.

This is an outer tub bolt and gasket.

This Injector hose seal is sold individually. The injector hose is no longer available.

This screw is sold individually.

Requires two washers.

This kit is part of the lid switch mechanism and will stop the spin cycle if the load is unbalanced. When you lift the lid, it resets the plunger and your cycle will resume.

This clip is designed to hold a timer knob in place.

This clamp does include the nuts and bolts to hold it together but it does not include the rubber seal. Sold separately.

This timer knob spring is almost an inch and a half long, and is not quite an inch in diameter. It is made of metal and is used with the timer knobs of both washers and dryers.

This center seal retaining washer is a little over an inch in diameter. It is made of metal.