917279081 Craftsman - Overview

Models starting with 917279081

Click on the best match to narrow your results.

Parts for models starting with 917279081

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
E.RING – Part Number: 812000001
No Longer Available
E.RING
Part #812000001
BRACKET PIVOT SEAT – Part Number: 532140551
No Longer Available
BRACKET PIVOT SEAT
Part #532140551
BOLT – Part Number: 874780616
No Longer Available
BOLT
Part #874780616
WASHER – Part Number: 819111016
No Longer Available
WASHER
Part #819111016
PIN.COTTER – Part Number: 876020412
No Longer Available
PIN.COTTER
Part #876020412
NUT – Part Number: 873510400
No Longer Available
NUT
Part #873510400
WASHER – Part Number: 819171216
No Longer Available
WASHER
Part #819171216
WASHER – Part Number: 819091210
No Longer Available
WASHER
Part #819091210
BEARING.THRUST – Part Number: 532124931
No Longer Available
BEARING.THRUST
Part #532124931
WASHER – Part Number: 819131614
No Longer Available
WASHER
Part #819131614
SPRING.ROD.BRAKE – Part Number: 532106888
No Longer Available
SPRING.ROD.BRAKE
Part #532106888
NUT – Part Number: 873350600
No Longer Available
NUT
Part #873350600
View More

Common Symptoms of models starting with 917279081

How this model fails, and the parts that fix it.

Will Not Start
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Wheel bushings were bad
29 of 48 people found this instruction helpful.
  • Anthony from OLIVEHILL, TN
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Read less
Was this helpful?
Thank you for voting!
Take the wheel off. Place the key in the slot. Put the wheel back on.
7 of 19 people found this instruction helpful.
  • Gary from PILESGROVE, NJ
  • Very Easy
  • Less than 15 mins
Just described it.
Was this helpful?
Thank you for voting!
Lound deck noise when mower put into motion
4 of 16 people found this instruction helpful.
  • Steven from Hickory, NC
  • Easy
  • Less than 15 mins
  • Socket set, Wrench set
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Read less
Was this helpful?
Thank you for voting!
View More