917279060 Craftsman - Overview

Models starting with 917279060

Click on the best match to narrow your results.

Parts for models starting with 917279060

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
E.RING – Part Number: 812000001
No Longer Available
E.RING
Part #812000001
MULCHING MOWER Black – Part Number: 532134149
No Longer Available
MULCHING MOWER Black
Part #532134149
BRACKET PIVOT SEAT – Part Number: 532140551
No Longer Available
BRACKET PIVOT SEAT
Part #532140551
Axle brace – Part Number: 169827
No Longer Available
Axle brace
Part #169827
Suspension bracket – Part Number: 199978
No Longer Available
Suspension bracket
Part #199978
Lawn Tractor Blade Idler Pulley Bracket – Part Number: 157109
No Longer Available
Belt keeper – Part Number: 169691
No Longer Available
Belt keeper
Part #169691
Nyliner.snap – Part Number: 169613
No Longer Available
Nyliner.snap
Part #169613
Lawn Tractor Spacer – Part Number: 136518
No Longer Available
Lawn Tractor Spacer
Part #136518
Lawn Tractor Blade Idler Pulley – Part Number: 173437
No Longer Available
Lawn Tractor Drawbar – Part Number: 176554
No Longer Available
Lawn Tractor Drawbar
Part #176554
Pivot bracket assembly – Part Number: 175710
No Longer Available
Pivot bracket assembly
Part #175710
View More

Common Symptoms of models starting with 917279060

How this model fails, and the parts that fix it.

Will Not Start
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Wheel bushings were bad
29 of 48 people found this instruction helpful.
  • Anthony from OLIVEHILL, TN
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Read less
Was this helpful?
Thank you for voting!
Needed to replace the bent blades on my riding mower.
17 of 30 people found this instruction helpful.
  • Trace from LISLE, IL
  • Very Easy
  • 15 - 30 mins
- Made the mower safe to work on the blades (remove spark plug wires, etc.)

- Raised the mower to get access to the blades, wedged a wood block against the blade.

- Used impact driver with socket to remove bolt holding blade.

- Removed blade, replaced with new, replaced bolt and tightened with impact drive r, ..... and you know the rest.
Read less
Was this helpful?
Thank you for voting!
Take the wheel off. Place the key in the slot. Put the wheel back on.
7 of 19 people found this instruction helpful.
  • Gary from PILESGROVE, NJ
  • Very Easy
  • Less than 15 mins
Just described it.
Was this helpful?
Thank you for voting!
View More