87904 - Instructions

Changing the cartridge tops over to Stainless Steel was very easy and looks good,

After examining the burner unit I noticed that one of the male contact spades was burned and look deformed. After removing the spade I discovered that it had been originally manufactured incorrectly. I went on line to try and find the part. I found it at this site . I ordered 2 of the spades and replaced the deformed spade and another one that looked like it had gotten a little hot. She tried the unit and it worked perfectly. She had not used that burner unit for a very lengthy time. The investigation of the problem took a little time, but the repair went very fast. Moral is :" If a spade doesn't look right, it probably isn't", but either the individual spade or plug can be replaced. This site is now my "GO TO" place for parts.

Pulled out the old burners and put in the new ones.

just replaced by hand .

No brain surgery required. Removed electric burner, put in new drip pans. Voila! Good for many more years of service looking like new.

remove burned out eye, replaced with new eye.new eye does not fit exactally correct onto splash pan as point on end of steel " rod " not pointed enough to slip into mate on splash pan

Pulled out the old burner and plugged in the new!

Replaced the drip pans

Our old Jenn-air cooktop was at least 28 years old.They looked bad.We didn't see the need to buy a whole cooktop when the rest of the stove, fan,etc. still worked great. So I got on the Partselect web site and found a black radiant cartridge. It came exactly the day the said it would. I took out the old coil cartridge and plugged the new one. Lo, my stove now looks modern. We also ordered a terminal block. With this my husband repaired the old burned out coil burner and in about 20 minutes I had a spare to use with my canner. I really like the new cartridge and plan to buy another one. It was a pleasure to do business with Partselect.

replaced drip pans--they fit perfectly and look great!

First I removed the screws that held the cartridge assemby together, seven screws went to each cartridge.They were easy to replace. I accidentally destroyed the original pans. I was pleased to have found partselect.com.If I would have ordered the parts I needed from an appliance supply store it would have taken two to three weeks to get the parts. Partselect not only had the parts they were able to get them delivered to me within three days. I've told my friends about this co. and I plan on continuing to do buisness with them in the future. I strongly recommend using this company. You won't be dissapointed.

Unplugged the burner units and replaced the drip pans. Five seconds time per burner.

couldn't find replacement in our town, which is quite
small and no Maytag dealers. So, I ordered on line two drip bowls and saved one"just in case"

Mission accomplished. Thanks allot.

I just pulled the electric element out of the slot and dropped the drip pan in place and slipped the electric element back in place and it was ready to go. It looks almost new. We built a new house in 95. It took 17 months to build it. I got the stainless steel cook top that you can have the grill on one side or you can pull the grill off and slip in the burners. It is only 4 burners but it is plenty to work with. It has a down draft.

just installed