8529 (Type 1) Porter Cable Router - Parts

This replacement collet is an authentic manufacturer-sourced component which is specially designed for use with Porter Cable and Black and Decker routers. Its purpose is to provide a tight grip for securing a router bit. It is a high-quality part which is made of durable metal and it is sold individually, please note the collet nut is sol...Read mored separately. Keep in mind that this collet is for using bits with 3/8" arbors only.

This is a genuine replacement part manufactured for use is power tools. This versatile steel washer has many applications. Usually this type of washer is used when fastening two components of a tool together with a nut and bolt. This washer is sold individually, please see model diagram for part location and usage.

This is a genuine replacement part sourced from the original manufacturer for use with routers, drill, and screwdrivers. The pan head screw is used with several different types of tools and the application of the screw can vary based on the model of the equipment. This screw is sold as an individual replacement part, please see illustrated diagram for part location and usage.

O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes for O-Ring failure, such as pressure, friction, temperature or chemicals. The most common are: • Extrusion and Nibbling ...Read more - O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. • Over Compression - O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening - O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking - O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

Included in part number 882350

This is a genuine OEM sourced part that is intended to be used with routers from Porter Cable, Delta, and Black & Decker. The metal snap ring is part of the collet and nut assembly. This item is used to fasten the collet and nut together. This item can be purchased as a single item.

This is an authentic OEM sourced replacement part designed for use with routers. This part allows user to secure bits in a tool. This collet is for using bits with 1/4" arbors only. Due to prolonged, heavy use a collets tend to wear out requiring replacement. It is made from strong metal material and it is sold individually. Please note ...Read morethe collet nut is sold separately. To replace this 1/4" collet you will need a wrench. • First you would need to remove the collet nut • Remove the old collet • Secure the new one in place • Tighten the collet nut