79094153310 Kenmore Range - Overview

Diagrams for 79094153310

See every part. Know exactly what you need.

Parts for the 79094153310

$20.88

Terminal Block Kit

★★★★★

(45)

Part #5303935058

This surface burner terminal block kit comes with interchangeable mounting brackets, terminal box, ceramic wire nuts, heat shrink protective tubing and wires.

$56.61

Infinite Burner Switch - Large Element

★★★★★

(98)

Part #316436001

This surface burner switch controls the stove top 8-inch surface burner temperature. This switch is 240-volt, 2100-2600 watt, and 8.8-10.8 amp. If your element is not defective but will not heat, you may need to replace the switch. This burner switch is a genuine OEM part. It is recommended to disconnect the power to your range before you start your repair.

$83.52

Temperature Sensor

★★★★★

(49)

Part #316490000

The temperature sensor, also known as an oven probe, detects the temperature within the oven cavity. This temperature sensor is 9 inches in length and is a genuine OEM part. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor. Please make sure to disconnect the power to your range before starting your repair.

$51.65

Surface Element - 8 Inch - 2600W

★★★★★

(23)

Part #316442301

This surface burner element is eight inches in diameter. It has five turns, 2600 watts and looped terminal ends. The element provides heat to the cooking surface on your range. If your element is not heating, you may need to replace this part. Please make sure the power has been disconnected and the element is turned off and had time to c...Read more

Read less

$21.12

Drip Bowl - 8 Inch

★★★★★

(15)

Part #A316222301

This is an 8-inch drip bowl for your range or cooktop. It is made of porcelain and is black in color. Place the drip pan under your burner to catch food that may drip or spill while you cook. It is 10 inches in total diameter. Be sure to wait until drip pan and burner are cool to the touch before completing this replacement.

$35.95

Light Bulb

★★★★★

(9)

Part #316538904

This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside your appliance. Installation is simple—just unscrew the old bulb and replace it with the new one. If the existing bulb is broken, disconnect p...Read more

Read less

$17.55

Drip Bowl - 6 Inch

Part #A316222201

This drip bowl is a genuine OEM replacement part for your stovetop. It is black in color, made of porcelain, and six inches in diameter. To replace the drip pan, you simply need to remove the burner element. It may be held in place by a spring-loaded mechanism. Pop out the burner, remove the old drip pan and clean up any cooking residue, and replace with the new drip pan.

$43.51

6-Inch Coil Burner Element

★★★★★

(10)

Part #318372211

This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element fr...Read more

Read less

$34.95

LENS

★★★★★

(14)

Part #5304524341

This lens covers the interior oven light bulb.

$96.98

Infinite Burner Switch - Small Element - 240V

★★★★★

(11)

Part #316436000

This switch controls the stove top surface burner.

$154.34

Bottom Panel

★★★★★

(22)

Part #316400601

This is used as the "floor" of the oven cabinet. Note: Does not come with rivets or screws. Must be purchased locally.

$135.91

GLASS

★★★★★

(24)

Part #5304503232

This is also called the heat barrier glass.

Questions And Answers for 79094153310

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Robert - For model number 79094153310

November 18, 2022

Replaced heat sensor, replaced oven element...oven still doesn't heat up

Hello Robert, thank you for contacting us. Provided that the oven element and temperature sensor are good, the issue is most probably related to the terminal block, part number PS2333392, and the electronic control board, part number PS8746794. The block connects the elements to the power supply and the board monitors the temperature and controls the oven heat. Please reach out to customer service if you need help placing an order. Glad to be of help!

$90.71

Terminal Block Kit

$527.03

Electronic Control Board

Was this helpful?

Common Symptoms of the 79094153310

How this model fails, and the parts that fix it.

Element will not heat

Fixed by
these parts

Little to no heat when baking

Fixed by
these parts

Show All

Oven not heating evenly

Little to no heat when broiling

Fixed by
these parts

Show All

Door won’t open after self cleaning cycle

Gas igniter glows, but will not light

Fixed by
these parts

Show All

Videos related to models starting with 79094153310

Watch our pros, then fix it yourself.

Replacing the Infinite Burner Switch - Large Element

Replacing the Terminal Block Kit

Replacing the Temperature Sensor

Replacing the Surface Element - 8 Inch - 2600W

Replacing the Bottom Panel

Replacing the Drip Bowl - 8 Inch

Replacing the Drip Bowl - 6 Inch

Replacing the DRAWER GLIDE

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Back Burner didn't function

136 of 152 people found this instruction helpful.

William from Burke, VA
Easy
15 - 30 mins
Screw drivers

We moved into our townhouse about 6 yrs ago. During the home inspection we checked the range and saw the Red light come on when we turned on each burner. After moving in we realized the large back burner did not work. The light came on but the element never got hot. I of course replaced the element but that did not work. Several years ... Read more passed and we just ignored the issue. We just got by with 3 burners. Lately we realized how much easier it would be to have all four burners working. Knowing that we will be selling our townhome soon we figured we should either fix the problem or replace the range.

I didn't want to call a repair man because I didn't want to be charged a $150 to have him come out and they to pay extra for parts (and of course a 2nd visit). So I went to www.Partselect.com and typed in the model of my range. Found the diagrams for my range and saw that from the switch ran a pair of wires to a Universal Receptacle (aka Terminal Block Kit). I figured since the Red light turns on when I turn the switch on it has to be the Terminal Block.

I ordered the part from www.Partselect.com ($14.00 including shipping) and replaced the part. The burner still would not get hot. I decided to test the switch. I removed the Control Panel cover (which is secure by 2 screws just below the digital clock). Once the cover was off, I saw the Blue wires going from the switch to the Terminal Block. To test the switch, I disconnected the two Blue Wires from connectors H1 and H2 and temporarily connected them to H1 and H2 of another switch. Sure enough, when I turned the other switch the element got hot.

So I placed another order from www.Partselect.com for a replacement switch ($50 including shipping). When that part came, I flipped the electrical circuit going to the range. I then removed the Control Panel cover again. With the new switch in hand (holding it near the old switch still attached to the Control Panel, I used the pliers to pull out each wire from it's connector and place it to it's corresponding connector on the new switch. Once all the wires were connected to the new switch, I pulled the knob of the switch off then used a phillips screwdriver to remove the two screws holding the switch to the control panel. I replaced the old switch with the new one put the screws back in, replaced the knob. Turned the circuit back on and tested to make sure that the element got hot. When it did, then I replaced the Control Panel cover and enjoyed a nice dinner that was cooked in less time than we're accustomed to because of the new burner. So I spent a total of $64.00 to fix our range. Less than half the amount I would've spent if I called for a technican. And far less then buying a new range.

Partselect is a great resource for information. They have diagrams and schematics available to view and/or download. And when ordering it's a snap because there's an "Add to Cart" button next to each part it lists. So there's no confusion. I've already recommended Partselect.com to about 5 people. And will continue to do so!!

Read less

Was this helpful?

Oven wouldn't operated. Error code F9

76 of 101 people found this instruction helpful.

Richard from Centennial, CO
Really Easy
Less than 15 mins
Nutdriver

I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).

Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet m ... Read more

Read less

Was this helpful?

burner shorted out

61 of 75 people found this instruction helpful.

David from Encinitas, CA
Easy
15 - 30 mins
Pliers, Screw drivers

I followed the directions by clipping wires to old burner socket, splicing the wires to new terminal block, screwing down new "block bracket," and plugging in new burner.

Other Parts Used:

Terminal Block Kit

Surface Element - 8 Inch - 2600W

Was this helpful?