All Installation Instructions for Kenmore Range 79092413202

Burner failed due to poor manufacturing quality

Disconnected power. Removed hold down fasteners for stove top. Fortunately, I did not flue down or use the double back tape to secure stovetop to counter. If this adhesive were used, it is possible I would have had great difficulty in removing range. I did not disconnect the wiring, but turned the range top over to access the cover. I removed the cover and easily removed the failed burner and installed the new ones. I had to pull 4 wires from the terminal strip and reattach them. The hold down strap for the burner was reinstalled. Range top turned back over and fastened down. Back in service.

Parts Used:

Radiant Surface Element

LaVern from Cedar Falls, IA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

13 of 17 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Front Right Radiiant burner was damaged

Followed the instruction printed on the page, while ordering the part.

Parts Used:

Radiant Surface Element

Rashiklal from Marietta, GA
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver

12 of 17 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven Racks needed to be replaced.

Slide out the old; slide in the new!

Parts Used:

Oven Rack

Peter from Chicago, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

11 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Draw Glide Broken Off Bottom Drawer.

New part arrived, opened pkg. , Pulled drawer out. . . Snapped in new parts. . . . Done!! Saved myself $100. 00.

Parts Used:

Rear Drawer Glide

Kathleen from fall river, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

9 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Heating element broke

Removed two screws in over pulled out part took off wires and put them on new elememt

Parts Used:

Bake Element

Joseph from Winter Park, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

8 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven racks rusted

Ordered new racks and replaced them.

Parts Used:

Oven Rack

Wendell from Ocala, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

11 of 21 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken Drawer Glide

It snapped right into the drawer, was very easy

Parts Used:

Rear Drawer Glide

Sharon from Hamlin, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven light bulb went dark; it needed replacing

Twisted replacement bulb into place easily. Let there be light!

Parts Used:

Light Bulb

Lise from CEDAR GROVE, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

9 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Error message on display ff30

Slid oven out removed one screw one plug replaced part took 5 minutes.told parts repair the error message and they sent me the correct part in two days will use them again saved me from Repair man wanted 85 dollars just to look at it my cost was 28 for probe and 8 dollars for shipping already helped neighbor with their stove they needed new ignighter 12 dollars repair place want 110 to come look at it this site walks you through repair best service!!!!

Parts Used:

PROBE

Roger from CHICAGO, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken lens over oven light

Your service was OUTSTANDING...Ordered one afternoon, and before lunch time the next day, the delivery man rang my door bell...Thanks a bunch for you excellent service.....

Parts Used:

LENS

Leslie from Warsaw, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

11 of 22 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Glides broke on lower storage drawer

The front glides easily snap into a hole on the sides of the range. The rear glides easily snap onto the sides of the lower rear of the drawer.

Parts Used:

Rear Drawer Glide

Front Drawer Glide

James from WEST BEND, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

While removing burned out light bulb, the glass cover fell to the floor of the oven and broke!!

Husband very ill in bed. It's up to me!! Got a new bulb at HomeDepot and figured out how to get that wire 'thing' back in and the new glass cover installed. I DID IT!! WOW! My husband has always done these jobs around the house.......but now it's up to me.......and I'm not so dumb after all! I DID IT!! Now everyone who comes in the house.....I show them what I DID!! :-)

Parts Used:

LENS

Phyllis from GAINESVILLE, GA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven wasn't heating properly for a few months and then stopped altogether

The hardest part was pulling the oven away from the wall. Two bolts hold the sensor in place and a clip connects the electronics. Replacing the old one was trivial.

Parts Used:

PROBE