All Installation Instructions for Kenmore Range 79090113012

Refrigerator Light bulb went out

I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.

Parts Used:

Light Bulb

ANGELA from MEBANE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Coroded drip pans

Removed heating elements and replaced drip pans. And by the way, this is the only 'pans' I could find to fit. Thanks.

Parts Used:

Chrome Drip Bowl - 6"

Drip Bowl - 8"

Lori from Old Town, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Old racks had melted plastic on them.

It was a replace racks not repair. No problem

Parts Used:

Oven Rack

James from PAINESVILLE, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Rusted leveling foot

I couldn't unscrew the leveling foot because it was rusted and corroded. The bracket holding it was easy to remove so I took the bracket with the corroded foot off and replaced it with the new foot and bracket. Very simple. I made sure I oiled it so it wouldn't rust again.

Parts Used:

LEVELING LEG ASSY

Melinda from Three Rivers, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)

5 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

replacing oven racks

The replacement racks were spot on and the service was outstanding. had the racks in 2 days. Happy Happy Joy Joy! :)

Parts Used:

Oven Rack

Lawrence from Elmira, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

surface element burned out

Simple Just plugged it in !

Parts Used:

Surface Element - 8 Inch - 220V

Robert from SEEKONK, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Element would not heat up

I couldn't explain how to do the job any better than your instructional video does. As long as you follow the video instructions you should have no problems.

Parts Used:

Surface Element - 8 Inch - 220V

Terminal Block Kit

david from BUCKEYE, AZ
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Change on e of the inside glass

removed the screws holding the front part of the door and from there worked my way, untill the third glass.
It took a couple hours, my first time,. Overall easy,

Parts Used:

Inner Door Glass

Ronald from Ozone Park, NY
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

element had been damaged

I unplugged the damaged element and plugged in the new one. It took less trhan 30 seconds and the unit worked just fine.

Parts Used:

Surface Element - 6 Inch

Merle from Towanda, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Crack in inner door glass

Removed two screws that are attached to handle then removed four screws from bottom edge of oven door. I was then able to remove the outer door glass,this gave me access to the three inner glasses. After removing the retainer for the glass assembly,I was able to remove all three and replace the inner one.I reversed this proceedure to reassemble.

Parts Used:

Inner Door Glass

Robert from Richmond, IN
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Burner switch work sometime.

I follow the video on your site

Parts Used:

Infinite Burner Switch - Small Element - 240V

junius from WICOMICO, VA
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I forgot to remove something I had saved in the oven, planning to remove it before using the range.

Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience with those in need of you services. Thanks. Marilyn Kasson

Parts Used:

Oven Rack