79080322310 Kenmore Microwave - Overview

Diagrams for 79080322310

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
FUSE – Part Number: 5304509451
$32.54
In Stock
Microwave Surface Light Bulb – Part Number: 5304461116
$49.42
In Stock
Microwave Surface Light Bulb
★★★★★
★★★★★
(5)
Part #5304461116
This light bulb is for microwaves. Light bulb illuminates the surface below the microwave or the interior of the microwave. Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part unless the owner's manual includes instructions for installing the light bulbs.
Door Switch – Part Number: 5304509459
$37.00
In Stock
Glass Cooking Tray – Part Number: 5304509621
$192.61
In Stock
Glass Cooking Tray
★★★★★
★★★★★
(10)
Part #5304509621
This round glass tray fits select microwaves and measures about 13 1/2 inches across. It holds food and turns during cooking to help heat it more evenly. The tempered glass has grooves underneath that connect with the turntable support or center coupler. Replace the tray if it is cracked, chipped, broken, or no longer turns correctly.
LATCH,DOOR – Part Number: 4056021605
$11.95
In Stock
SWITCH – Part Number: 5304509460
$66.56
In Stock
SWITCH
★★★★★
★★★★★
(4)
Part #5304509460
This microwave door switch works with the door latch to control when the appliance can run, a worn switch may cause the microwave to lose power, fail to start, or trip a breaker, it fits select upper and lower switch locations, high voltage may remain inside the microwave after power is removed, use a trained technician for installation, confirm fit with the exact model number.
Wave Guide Cover – Part Number: 5304509435
$30.55
In Stock
Wave Guide Cover
★★★★★
★★★★★
(7)
Part #5304509435
This microwave waveguide cover protects key internal components by blocking food particles, grease, and moisture from entering the waveguide area. Located on the interior wall of the microwave, it helps ensure safe and efficient operation. Replacement is recommended if the cover is cracked, burned, or causing sparking, helping prevent further damage and maintain proper performance.
Switch Holder – Part Number: 5304509457
$59.35
In Stock
Switch Holder
★★★★★
★★★★★
(3)
Part #5304509457
A loose door, repeated clicking, or intermittent operation can indicate a damaged latch body or switch holder. The housing aligns the safety switches with the door hooks and helps prevent operation while the door is open. First inspect the latch opening, door alignment, mounting tabs, and switches to identify every damaged component. Match the replacement to the microwaves full model number and verify what the assembly includes. Unplugging does not remove the high-voltage capacitor hazard, so professional service is recommended. Do not test the appliance with covers removed or safety interlocks bypassed.
Coupler – Part Number: 5304509622
$37.45
Special Order
Coupler
★★★★★
★★★★★
(2)
Part #5304509622
This coupler is a replacement mechanical component used to connect and transfer motion between internal assemblies. It is commonly replaced when wear causes slipping, noise, or loss of function.
PLATE – Part Number: 5304509487
$71.45
In Stock
PLATE
★★★★★
★★★★★
(1)
Part #5304509487
Hardware is not included. Must be ordered separately.
Microwave Grease Filter – Part Number: 5304509444
$102.57
In Stock
Microwave Grease Filter
Part #5304509444
Sold individually. This grease filter is for microwaves. Grease filter traps grease from the exhaust air. Follow the instructions in the owner's manual when installing this part.
MOTOR – Part Number: 5304509440
$142.07
In Stock
MOTOR
★★★★★
★★★★★
(1)
Part #5304509440
This motor rotates the glass turntable in the microwave and accepts a D- shaped shaft.

Questions And Answers for 79080322310

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim - For model number 79080322310
July 2, 2021
After a water leak ( and perhaps a resulting electrical problem ), the microwave ( which was never near water ) now has the following problem:When the door is closed, the light remains on and the fan starts. open the door and their is no problem. the microwave does work, but the fan and light never go off with the door closed. i looked at the symptoms list but didn't see this specific problem. thanks for any help you can provide.
Chris Boyle Profile
Hi Tim, Thank you for your question. If the microwave is not in use and light remains on and the fan starts, the issue is likely the door switches and they will need to be replaced. The part numbers for them are PS12071302 and PS12071303. You will need 2 of part number PS12071303. It is recommended to replace all 3 door switches at the same time. If you would like to place an order for them, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
$37.00
In Stock
Door Switch
$66.56
In Stock
SWITCH
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Jeff - For model number 79080322310
March 16, 2023
How do you replace the left side counter top lamp?
Chris Boyle Profile
Hi Jeff, thank you for your question. You may follow the following steps to replace the countertop bulb: 1. Unplug the microwave oven or disconnect the power. 2. Remove the bulb cover mounting screw for the specific bulb you want to replace. 3. Replace the bulb, then plug in the microwave oven or reconnect the power. Glad to be of help!
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Carey - For model number 79080322310
March 9, 2024
took microwave apart to replace a bulb, put it back together but we are left with an extra part. I *think* it's B67 (?) which is some kind of shield(?). Don't know where it goes or how to replace it.
Chris Boyle Profile
Hi Carey, thank you for reaching out. Based on our research, the shield is located at the base of the microwave door. You may need to attach it to the base with its mounting screws. We hope this information helps!
Was this helpful?
Thank you for voting!
Carolyn - For model number 790
June 10, 2026
a ceramic plate was left in microwave and broke the glass rotating plate. i think the insert that rotates the plate melted. is there a way to remove that or is the oven just a throw a way now
Chris Boyle Profile
Hello Carolyn, thank you for reaching out. Based on your model number, the part that rotates the plate is the turntable motor coupler, part number PS12071367. It is a replaceable component, so you do not need to throw away the oven. To remove it, you can often simply pull it out by hand or carefully pry it free with a flathead screwdriver. We hope this helps!
$37.45
Special Order
Coupler
Was this helpful?
Thank you for voting!
Sandra - For model number 79080322310
April 9, 2023
Doesn’t heat..but everything else works. Should I just buy a new one or are they worth repairing..4-5 years old
Chris Boyle Profile
Hi Sandra, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the magnetron, part number PS12705729, which is the most likely cause of this issue. If it is faulty, you may need to replace it. We hope this helps!
$420.32
In Stock
MAGNETRON
Was this helpful?
Thank you for voting!
  • 1
  • 2

Common Symptoms of the 79080322310

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave tripped circuit breaker when turned on
41 of 68 people found this instruction helpful.
  • Arthur from LUTZ, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
Was this helpful?
Thank you for voting!
Power would not come on, would trip breaker when connected.
18 of 28 people found this instruction helpful.
  • JOSEPH from MIAMI, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear which was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!
Was this helpful?
Thank you for voting!
Pressing the start, microwave will start and dies out. Electric is tripping.
11 of 18 people found this instruction helpful.
  • ARNEL from WAUKEGAN, IL
  • Easy
  • 15 - 30 mins
  • Screw drivers
The diagnosis is about an hour. Coz, I need to open the control panel, got a tester, and trsted all critical parts inside the panel.
Also, replaced the fuse just to make sure its a new one. Found out it was a switch (bottom part) that control the open/close of the microwave door.

When found out the problem, the rest of t he work is easy.
Was this helpful?
Thank you for voting!