My Orders
- Home
- 79075353313
- Instructions
79075353313 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
no heat
-
John M. from PLEASANT PRAIRIE, WI
- Easy
- Less than 15 mins
-
Nutdriver
Replaced the oven probe because a no heat problem. also had to replace the oven control. That was a bit expensive but still saved me hundreds not calling a serviceman. By the way, it works like new.....
Was this helpful?
Thank you for voting!
broil element burn out
-
christopher from big pine key, FL
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set
take back planel off, take wires off old element and intsall new element hookup wires, put back planel ..under one hour job
Was this helpful?
Thank you for voting!
oven took too long to heat up
-
JAONNE from GAFILED, NJ
- Really Easy
- 15 - 30 mins
-
Nutdriver
un bolted the 6 nut driver heads found probe wire un pluged it 1/4 turn from lock it was in and pull out replace slide in new probe 1/4 turn to lock it in place replace nut driver self tappers and test simple!!
Was this helpful?
Thank you for voting!
I had placed aluminum foil on bottom and it adhered to the surface.
-
Marilyn from Logansport, IN
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
I removed two screws and lifted out the ruined bottom. I set the new bottom in, but could not get the screws lined up so left them out. The bottom is heavy enough, it is not going anywhere. I am very grateful the part was available.
Was this helpful?
Thank you for voting!