79030552800 Kenmore Wall Oven - Parts

Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.

This flat style gas oven igniter has an amperage range between 3.2 to 3.6. This part comes with two ceramic wire nuts.

This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside your appliance. Installation is simple—just unscrew the old bulb and replace it with the new one. If the existing bulb is broken, disconnect p...Read moreower and use needle-nose pliers to safely remove the remaining base. Sold individually, this bulb is a commonly replaced part—consider keeping a spare on hand.

This lens covers the interior oven light bulb.

This storage drawer roller allows the drawer to slide in and out smoothly while maintaining proper alignment. Designed for reliable movement and stability, it is an effective replacement when drawers bind, tilt, or become difficult to open and close.

This retainer secures the light lens to the oven cavity.

This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.

Sold individually.

A light or fan that responds only when its control is moved may have a worn rocker switch. This replacement switch mounts in the appliance panel and controls power to the assigned feature. Its exact job varies by model, so check the wiring diagram before installation. First inspect the bulb or fan, wiring, terminals, and power supply beca...Read moreuse another fault may be responsible. Turn off the circuit breaker and confirm the appliance has no power. Allow the cooking area to cool and wear gloves around sharp panel edges. Label each wire, avoid pulling on the wire itself, and make sure every terminal fits tightly during reassembly.