78739 (AWB4SER) LG Refrigerator - Parts

This door switch is used in refrigerators. It is activated by the closing and opening of the door

This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as ...Read morethey commonly wear at the same rate. This is about 1 inch long and metallic in color.

This OEM filter measures 2.5 inches deep, 12.5 inches high, 5 inches wide and roughly 1.5 lbs. It is recommended to replace this filter every six months or 300 gallons, whichever comes first. If you notice an unpleasant taste in your water or it suddenly dispenses much slower, these are also common indications that a replacement is necess...Read moreary. It filters sediment, dirt, rust, cysts, lead, mercury, and more. For proper use, operating pressure should be 30-120 PS, operating temperature should be 33-100 degrees Fahrenheit, with a flow rate of 0.5 gallons per minute. Installation is quick and easy and does not require the use of tools.

Sold individually.

This compressor start relay and thermistor assembly helps start the refrigerator's compressor and protects it from overheating during operation. It provides the electrical boost needed to get the compressor running, which is essential for maintaining proper cooling inside the refrigerator. If the refrigerator is not cooling properly, the ...Read morecompressor is not starting, or you hear repeated clicking noises, a faulty relay assembly may be the cause. Replacing this part can help restore reliable compressor operation and keep the refrigerator cooling as intended.

This single-coil water inlet valve is designed for use in refrigerators and controls the flow of water to both the ice maker and water dispenser. It plays a critical role in maintaining consistent water delivery ensuring proper ice production and dispenser functionality. The valve helps regulate pressure and timing optimizing system perfo...Read morermance and preventing issues such as slow ice output weak water flow or interruptions in dispensing. Common symptoms of a failing valve include no water dispensing ice maker failure or leaks near the dispenser area. Installation requires disconnecting the appliance from power and water supply and verifying compatibility with your specific model before replacement.

This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh food section. If the fresh food section is too warm or the motor has failed, you will need to replace the evaporator fan motor. It is sugges...Read moreted to replace the thermistor when replacing the evaporator fan. The fan motor is in the freezer section of the refrigerator, and includes the harness and plug. Please remember to disconnect the power to the refrigerator before starting your repair. This is a genuine OEM part.

This valve helps your fridge deliver water to the ice maker and dispenser. If you’re not getting ice, the dispenser isn’t working, or you hear strange noises, this part might be the fix. It’s easy to install—just make sure it fits your model and turn off the power and water before replacing.