My Orders
73133 LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The spring on the mullion door broke for the last time
2 of 2 people
found this instruction helpful.
-
Sonya from VAIL, AZ
- Really Easy
- Less than 15 mins
This was an incredibly easy repair! 1 phillips screwdriver and two screws. Disconnect the small adapter, and you are good to go!
Was this helpful?
Thank you for voting!
Plate Assembly Spring Broken
2 of 2 people
found this instruction helpful.
-
Jim from WELLINGTON, FL
- Really Easy
- 15 - 30 mins
-
Screw drivers
Remove 2 screws holding to door. Slide assembly up. Unplug connector. Remove old Plate Assembly. Do reverse to reinstall. Plug connector. Push in wires. Slide plate on. Fasten screws. Done
Was this helpful?
Thank you for voting!
The spring that connects the flipper assembly to the left door broke.
2 of 2 people
found this instruction helpful.
-
Eric from HUDSON, IL
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed the 2 Phillips head screws that attach the flipper assembly to the door. Slide the flipper assembly up to disconnect the top & bottom bracket. Disconnect the quick connect wire assembly behind the center hinge bracket and remove the flipper assembly. Install the new flipper assembly in reverse order.
Was this helpful?
Thank you for voting!
Light switch for refrigerator not functioning
2 of 3 people
found this instruction helpful.
-
shirley from ONALASKA, WI
- Easy
- 30 - 60 mins
-
Screw drivers
Followed instructions online
Was this helpful?
Thank you for voting!
Leaking
2 of 3 people
found this instruction helpful.
-
Johnny from MOUNT OLIVE, AL
- Really Easy
- 30 - 60 mins
-
Screw drivers
Swapped old one with new one. New one had extra plug not needed.
Was this helpful?
Thank you for voting!
Spring broke on Mullion
2 of 3 people
found this instruction helpful.
-
Michael from MONTGOMERY, AL
- Very Easy
- Less than 15 mins
-
Screw drivers
Watched the video. Took the screws out, unplugged the connection and slid mullion off. Then plugged the new one in, slid it on and attached the two screws.
Was this helpful?
Thank you for voting!
The switch became intermittent - Possibly a poor designe
1 person
found this instruction helpful.
-
Sidney from ENDICOTT, NY
- Very Easy
- Less than 15 mins
-
Screw drivers
Used a small screw driver inserted into the front of the switch (facing the front) and pried until the switch was coming out. When out, I removed the connect harness and replace the switch with a new one.
Was this helpful?
Thank you for voting!
Spring in the plate front assembly broke. Door plate assembly would not move into correct position, preventing door from closing.
1 person
found this instruction helpful.
-
Robert from WARREN, RI
- Very Easy
- Less than 15 mins
-
Screw drivers
Followed Youtube video provided on the PartsSelect Website:
https://www.partselect.com/PS12374439-LG-AGU75188619-PLATE-ASSEMBLY-FRONT.htm?Inventory=12374439&SourceCode=20&SearchTerm=LFX28979ST
Made installation of the new part a piece of cake. Easy peasy!! Took less than 10 minutes.
https://www.partselect.com/PS12374439-LG-AGU75188619-PLATE-ASSEMBLY-FRONT.htm?Inventory=12374439&SourceCode=20&SearchTerm=LFX28979ST
Made installation of the new part a piece of cake. Easy peasy!! Took less than 10 minutes.
Was this helpful?
Thank you for voting!
door slight switch failed
1 person
found this instruction helpful.
-
Greg from CASA GRANDE, AZ
- Really Easy
- Less than 15 mins
-
Pliers
Covered the sidewall with tape to protect. Pried the switch out with knife blade and removed electric plug with needle nose pliers. placed plug in new switch and pushed switch into the hole in the side wall. Took about five minutes.
Was this helpful?
Thank you for voting!
Removed old part.
1 person
found this instruction helpful.
-
Steve from NORTH AURORA, IL
- Very Easy
- Less than 15 mins
-
Screw drivers
Installed new one.
Was this helpful?
Thank you for voting!
Replace switch
1 person
found this instruction helpful.
-
Dean from HILLSDALE, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Read previous tips
Taped off area around switch to protect surface
Used putty knife to extract switch
Used screwdriver to separate connector from switch
Plugged in connector
Pushed switch assembly into opening
Removed tape
Taped off area around switch to protect surface
Used putty knife to extract switch
Used screwdriver to separate connector from switch
Plugged in connector
Pushed switch assembly into opening
Removed tape
Was this helpful?
Thank you for voting!
Door light switch, 3rd one I have replaced in 6 years made in China.
1 person
found this instruction helpful.
-
Charles from CURWENSVILLE, PA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Easy install, small screwdriver under back of old switch push out and pull out with small pliers. unsnap the old plug and install new. YOUR DONE
Was this helpful?
Thank you for voting!
Old part did not seal properly
1 person
found this instruction helpful.
-
Donald from MERRITT IS, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Read the reviews from other members and just did as they said. Needed a screw driver and the info from past persons review couldn’t have been easier.
Was this helpful?
Thank you for voting!
Ice bucket broken
1 person
found this instruction helpful.
-
EDWARD from ASSONET, MA
- Really Easy
- Less than 15 mins
Replaced with new bucket
Was this helpful?
Thank you for voting!
Spring broken in door mullion
1 person
found this instruction helpful.
-
Wayde from SEMINOLE, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Took 2 screws out and disconnect wire and install new part.
Was this helpful?
Thank you for voting!