72183 (ASTCSE1) LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ordering the right parts
4 of 10 people
found this instruction helpful.
-
Kip from RICHMOND, VA
- Very Easy
- Less than 15 mins
I ordered the needed parts, the correct ones I thought, but when they arrived, I realized they were the wrong parts shipped to me. The reason the wrong parts were shipped to me was because PartsSelect failed to advise me there were none of the parts I needed available so they shipped the left hand basket assembly, door, versus the desire
... Read more
d right hand basket assembly, door. I then had to return the wrong parts shipped to me, at my cost of ~$25, and await a refund for the wrong parts originally shipped to me. That's how I did the repair.
Read less
Was this helpful?
Thank you for voting!
The Ice maker stopped working
2 of 4 people
found this instruction helpful.
-
Joseph from SAINT LOUIS, MO
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Thanks to videos on You-Tube which showed step by step removal and replacement. It was a simple process. only thing missing on the video was information on the green ground wire.
Was this helpful?
Thank you for voting!
Cracked crisper tray unit cover assembly
1 person
found this instruction helpful.
-
WES from SOUTHLAKE, TX
- Really Easy
- 15 - 30 mins
Remove glass cover, take out both humidity and air tight crisper drawers, then remove the cover assembly.
Reassemble with new cover
Reassemble with new cover
Was this helpful?
Thank you for voting!
Replaced cracked refrigerator door shelvers
1 person
found this instruction helpful.
-
Larry from SANTA ROSA, CA
- Very Easy
- Less than 15 mins
Slid the replacement shelves into place.
Was this helpful?
Thank you for voting!
In Door Ice Bin with built-in ice dispenser drive wheel gear broke when dispensing the ice.
1 of 2 people
found this instruction helpful.
-
Steven J from Phoenix, AZ
- Very Easy
- Less than 15 mins
I replaced the whole self-contained unit. I removed the old ice bin simply by lifting it out of the door and replacing it with a new one directly under the ice maker. It was a simple fix; no tools or service tech were required.
Was this helpful?
Thank you for voting!
Bad door gasket
1 of 2 people
found this instruction helpful.
-
Ray from HOUMA, LA
- Very Easy
- Less than 15 mins
Very good removed old gasket and install new one in under 5 mins.
Was this helpful?
Thank you for voting!
Cold water control rusty and leaking water
2 of 6 people
found this instruction helpful.
-
Homer from MARION, VA
- Really Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
Removed old part very easily and installed the new part without any problems. Used and adjustable wrench and screwdriver
Was this helpful?
Thank you for voting!
Ice chute would not open.
18 of 54 people
found this instruction helpful.
-
Steve from MUKWONAGO, WI
- Easy
- 30 - 60 mins
-
Screw drivers
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.
Was this helpful?
Thank you for voting!
Spring was broken on original unit, had to replace whole lever.
0 of 1 people
found this instruction helpful.
-
Alan from Sun City West, AZ
- Really Easy
- Less than 15 mins
-
Screw drivers
removed old lever ( 2 screws ) took apart electrical connection, replaced lever, connected electrical hookup, put in screws. DONE !!!!!!
Was this helpful?
Thank you for voting!
plastic tube leaking at connector
1 of 5 people
found this instruction helpful.
-
GREG from STILLWATER, NJ
- Really Easy
- 15 - 30 mins
-
Pliers, Wrench (Adjustable)
Uncoupled the old connector, replaced with new connector and attached supply line. Repair easy with right part, prior to ordering the right part I had tried a compression fitting and it still leaked. U-tube and others demonstrating repair assured me I was on the right path.
Was this helpful?
Thank you for voting!
My dishwasher was leaking water
0 of 2 people
found this instruction helpful.
-
rosalie from wayne, NJ
- Really Easy
- 15 - 30 mins
The repair went well. They actually had to replace the motor. This saved me a lot of money having it repaired in this manner. Very professional & pleasant.
Was this helpful?
Thank you for voting!
Frost in the freezer. Icemaker frozen.
1 of 8 people
found this instruction helpful.
-
Teresa from Miami, FL
- Really Easy
- More than 2 hours
I called LG and followed the instructions given over the phone. The instructions couldn't have been simpler. Disconnect the appliance for several hours and then connect again. I disconnected the appliance overnight, cleaned out the freezer, and reconnected it. Problem solved. Did not need to call a repairman and did not use the clips.
Was this helpful?
Thank you for voting!
replace hand screw
2 of 11 people
found this instruction helpful.
-
dorothy from SALISBURY, MD
- Very Easy
- Less than 15 mins
-
Screw drivers
unfortunately my fridge stopped working. I purchased another but wanted to try and repair the old one. when ew one arrived, the old one was supposed to be put in garage but instead was hauled away. Had delivery return next day but they had as already removed and lost the handle screw for the bottom freezer and the screw that holds handle
... Read more
in place. ordered the handle screw and picked up the nut. very simple to install the screw and put handle back on.
Read less
Was this helpful?
Thank you for voting!
Water/ice maker not working
9 of 38 people
found this instruction helpful.
-
Brent from ROGERS, MN
- Really Easy
- Less than 15 mins
-
Screw drivers
Remove push plate for water/ice maker switch, remove 2 screws and 2 wires for switch. Replace with new.
Was this helpful?
Thank you for voting!