All Installation Instructions for LG Dryer 71522

No heat

Pull off the top and front of the dryer and reached in and replaced the part it was easy. Had to clean all the dryer out real good with from the lint

Parts Used:

High Limit Thermostat and Thermistor Kit

Brent from HINCKLEY, UT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dryer Filter had a whole in it.

Removed the old damaged filter and replaced it a new one.

Parts Used:

Dryer Lint Filter Assembly

Beverly from AMITYVILLE, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Lint filter cracked

Put the new lint filter in and it was completed

Parts Used:

Dryer Lint Filter Assembly

Kimberly from COMMERCE CITY, CO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dryer quit spinning

One of the roller assembly froze up & had a flat spot on it. There for causing the drum not to rotate. Pulled it out replaced the roller & up & running.

Parts Used:

4 PACK ROLLER ASSEMBLY

Peggy from San Bernardino, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Filter edge cracked

Take old one out and slide new filter in.

Parts Used:

Dryer Lint Filter Assembly

Patrina from Elberta, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

no heat

I replaced the thermistor, then the gas ignitor which were easy to get to once the drum was out. The gas is still not igniting so not sure where to go from here. Putting the drum belt back on took some muscle. But then I'm 71.

Parts Used:

Gas Igniter

Barbara from CUDAHY, WI
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Drum cracked

Repair was easy, but the part does not come with directions. It is pretty self explanatory if you are used to taking things apart and fixing them. Otherwise there are YouTube videos you can pull up. Dryer runs like it is new again though and it was way cheaper than buying a new dryer.

Parts Used:

TUB ASSEMBLY,DRUM

Stephanie from RENO, NV
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dryer work but wouldn’t shut off when finished cycle, had to shutoff from breaker

With a thin flat screwdriver I was able to pry out the old door switch, I replaced it with the new door switch, pushed back in dryer and so far is working since I installed a month ago.

Parts Used:

Safety Switch Assembly

joaquin from MIAMI BEACH, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broke the tub drum

Exchange

Parts Used:

TUB ASSEMBLY,DRUM

Sergio from CORNELIUS, OR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Not heat

Followed the instruction on video.was great after three parts now is OK .we have heat.still cheaper than having it service.

Parts Used:

Dryer Thermistor

Sal from MORENO VALLEY, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

HST code given by dryer

Called LG on the phone and they gave the button presses for diagnostics, which then gave the HST code, saying the Humidity sensor was bad.
The part was described as the Humidity sensor module. Actually it's just the wire leads for the sensor which must be electronic and only accessible by disassembling the dryer. There were descriptions about cleaning the wires, perhaps because some people use dryer sheets which cause a buildup on the wires and prevent them from doing their job. I use wool balls and have no buildup on my wires and replacing them did not fix the sensor, because the module accessible inside the dryer is not the moisture sensor, but only the wire leads.

Parts Used:

Moisture Sensor

marty from NEOSHO, MO
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Lamp cover broke

Unscrew the screw, remove old part, place in new part, replace screw and you are done.

Parts Used:

Lamp Cover

Lorraine from SEQUIM, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Igniter burned out

Completely had to dismantle the dryer to get to the igniter.
The screw holding the igniter is a SOB to get at for extraction, and even worse putting back.,

Parts Used:

Gas Igniter