Models > 6WSC20C6XB00 > Instructions

6WSC20C6XB00 Whirlpool Refrigerator - Instructions

All Instructions for the 6WSC20C6XB00
136 - 138 of 138
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ice maker would not disperse cubes through the door
Looked at drawing to see what sequence the parts went.
Parts Used:
Ice Dispenser Drive Shaft Spring
  • Danny from Fulton, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Water filter was due to change. Depending on water quality, you have to change every 6 months.
Pulled the old filter out and plugged the new one in. Make sure you check that both O rings are on the new filter. Firmly push in. I have had an air lock in my ice machine and it took a couple of days before it started to make ice again. Easy deal.
Parts Used:
Refrigerator Ice and Water Filter
  • Wesley from Las Vegas, NV
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken fan blade
unplug refrigerator, take backing off with nut driver. Pull old blade off and put new blade on. Put backing back on and plug in.
Parts Used:
Fan Blade
  • David from Ceres, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 6WSC20C6XB00
136 - 138 of 138
Back to Top