- Home
- 66561654102
- Instructions
66561654102 Kenmore Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
broken glass turntable
405 of 422 people
found this instruction helpful.
-
Deborah from Baltimore, MD
- Really Easy
- Less than 15 mins
No repair- just replaced glass turntable.
Right part I needed with first try
Right part I needed with first try
Was this helpful?
Thank you for voting!
light bult needed to be replaced
224 of 331 people
found this instruction helpful.
-
Deborah from Millersville, MD
- Difficult
- Less than 15 mins
-
Screw drivers
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the li
... Read more
ght bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Read less
Was this helpful?
Thank you for voting!
Bulb "burnt out"
98 of 166 people
found this instruction helpful.
-
Joseph from Pembroke, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb.
Was this helpful?
Thank you for voting!
Glass microwave turntable shattered while taken out for a cleaning.
95 of 162 people
found this instruction helpful.
-
STEPHEN from FORT MYERS, FL
- Really Easy
- Less than 15 mins
PartSelect had the turntable I needed at the best price. Ordering was easy, but best of all, the part was delivered next day. I was able to insert the new turntable plate into the microwave and it was good as new.
Was this helpful?
Thank you for voting!
Replacement turntable glass
80 of 142 people
found this instruction helpful.
-
Beverly from Hauppauge, NY
- Really Easy
- Less than 15 mins
Opened the box and popped it in. No problem with that.
Was this helpful?
Thank you for voting!
I broke the glass plate to the microwave.
69 of 134 people
found this instruction helpful.
-
Rosalina from Madera, CA
- Really Easy
- Less than 15 mins
The part was sent to me the next day! And it was the right part. Awesome!
Was this helpful?
Thank you for voting!
broken glass turntable
69 of 135 people
found this instruction helpful.
-
Joseph from Buena Vista, CO
- Really Easy
- Less than 15 mins
set the table on the support ring
Other Parts Used:
Was this helpful?
Thank you for voting!
Broken Microwave Tray
65 of 131 people
found this instruction helpful.
-
Eric from Puyallup, WA
- Really Easy
- Less than 15 mins
This is the second replacement tray we have in installed. The first one ( Not From Here ) we had for less than 5 months, we made a bag of popcorn, and about 5 minutes later we heard a crash, not knowing where the noise came from we dismissed it. The next day we opened the microwave a saw the plate had shattered. So we hope that this wi
... Read more
ll not do the same thing.
Read less
Was this helpful?
Thank you for voting!
Microwave turntable does not work
33 of 41 people
found this instruction helpful.
-
Todd from San Bernardino, CA
- A Bit Difficult
- More than 2 hours
-
Pliers, Screw drivers
My unit is a wall mount/cabinet/built-in model. The repair is actually fairly simple once you determine that the actual microwave is just a component of the entire unit, and that it (the microwave) can be easily removed from the unit. I did not figure this out until after I removed the entire unit (disconnect the power supply, lift the
... Read more
entire bulky, heavy unit out of the cramped space in the cabinet, etc). Once I got it out I figured out how easy it is to remove the actual oven - a couple of screws, literally. The unit is a bit bulky, but not particularly heavy and is quite manageable. I did this entire process alone.
I got the oven out, rolled it on it's side and found the plate to access the motor. The plate is located on the bottom/underside of the unit. The plate is nothing more than a section of the underside of the metal housing that has been cut-out as an access point. This "cut-out" is not complete - that is, not completely cut out so as to all the plate to stay in place without the need for screws, etc, until you actually have to use it. I used a pair of dykes to cut the couple of points still connecting this plate, removed the two phillips screws to remove the motor, disconnected the two wires connected, then reversed to complete the repair. You then flip the cut-out plate over/rotate it, and some screw holes line up. Find a couple of small screws, and re-attach the plate to cover the motor.
The actual fix is really easy, again, once you figure out the simple way to remove the oven. I am an idiot, so you will probably find this much easier. I could probably do this repair now, after my experience, in less than 30 minutes (probably less than 15 minutes). I probably save a couple hundred $ by doing it myself so was well worth the time to do it. Good luck.
I got the oven out, rolled it on it's side and found the plate to access the motor. The plate is located on the bottom/underside of the unit. The plate is nothing more than a section of the underside of the metal housing that has been cut-out as an access point. This "cut-out" is not complete - that is, not completely cut out so as to all the plate to stay in place without the need for screws, etc, until you actually have to use it. I used a pair of dykes to cut the couple of points still connecting this plate, removed the two phillips screws to remove the motor, disconnected the two wires connected, then reversed to complete the repair. You then flip the cut-out plate over/rotate it, and some screw holes line up. Find a couple of small screws, and re-attach the plate to cover the motor.
The actual fix is really easy, again, once you figure out the simple way to remove the oven. I am an idiot, so you will probably find this much easier. I could probably do this repair now, after my experience, in less than 30 minutes (probably less than 15 minutes). I probably save a couple hundred $ by doing it myself so was well worth the time to do it. Good luck.
Read less
Was this helpful?
Thank you for voting!
burned out bulb
28 of 39 people
found this instruction helpful.
-
john from plainfield, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
removed two screws,lowered the glass shield,removed the burned out bulb and replaced it with the new one. I ordered the bulb from parts select and recieved it two days later. It was a pleasure to deal with them, and certainly use them again.
Was this helpful?
Thank you for voting!
Microwave wouldn't turn on and found breaker been tripped and then microwave wouldn't turn on at all.
31 of 55 people
found this instruction helpful.
-
Daniel from DECATUR, GA
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Read some instructions and easily found the fuse. Replaced it. Still didn't work. Took control panel off to check door switches. Nothing I read mentioned a second fuse. Tested and it to had blown. Ordered another one. Popped them in. Done.
Was this helpful?
Thank you for voting!
Burned out light bulbs in microwave hood stove
24 of 35 people
found this instruction helpful.
-
Herbert from Norton, MA
- A Bit Difficult
- 15 - 30 mins
-
Screw drivers
I had some difficulty removing the glass plate because of the awkward (upside down) position of the screw that retained it. After replacing the burned out bulbs and replacig the glass plate the problem of replacing the screw involved my dropping the thing several times before I got the screw threads to catch. I got a screw thread to cat
... Read more
ch enough to hold the glass plate in position and left it at that.
Read less
Was this helpful?
Thank you for voting!
blown dual element lightbulb
19 of 25 people
found this instruction helpful.
-
Glenn from BRISTOW, VA
- Easy
- Less than 15 mins
-
Screw drivers, Wrench set
The hard part was trying to find the light bulb locally. The locally sold light bulbs were either too long, not dual element or not powerful enough. So I ordered the light bulb straight from PartSelect. When it came time to install the new light bulb I carefully removed the screw holding the plate in position so as not to loose it in my
... Read more
gas stove. I needed the mirror to line up the light bulb and screw it in. Once it was in I verified operation and closed up the plate being careful not to drop the screw into my gas stove. Problem solved.
Read less
Was this helpful?
Thank you for voting!
door handle broke.
21 of 32 people
found this instruction helpful.
-
JAMES from NAPERVILLE, IL
- Easy
- 15 - 30 mins
-
Screw drivers
1. Remove 2 screws on edge of door, these hold door trim on.
2. Using putty knives, gently lever outer door trim away from door, moving knives around door.
3. Door trim will come off, at bottom move insulation and remove lower handle screw. Remove upper handle screw.
4 Instal new handle, a reverse of #3, do not over tight ... Read more en screws.
5. Replace door trim, it snaps into place, it may require a small whack.
6. Have a pat on the back for saving $100.
2. Using putty knives, gently lever outer door trim away from door, moving knives around door.
3. Door trim will come off, at bottom move insulation and remove lower handle screw. Remove upper handle screw.
4 Instal new handle, a reverse of #3, do not over tight ... Read more en screws.
5. Replace door trim, it snaps into place, it may require a small whack.
6. Have a pat on the back for saving $100.
Read less
Was this helpful?
Thank you for voting!
The display kept asking me to close the door, even though the door was closed. The interior light stayed on.
16 of 21 people
found this instruction helpful.
-
E G from SILVERDALE, WA
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers
I used a Google search to show how to access the area behind the front panel. There was a folded paper copy with a schematic and wiring diagram in that space.Then I used a multi-meter to determine which of the THREE micro-switches was causing the problem. I called your help line and ordered a replacement switch. The switch was delayed
... Read more
in transit so your agent credited me with the cost of shipping.
When the part arrived, it had three terminals instead of two as shown in the on-line picture but that did not cause any difficulty in using it. It took about 20 minutes to remove and replace the old switch.
All seems to be working well now.
Finding which of the THREE switches was the problem was the most difficult part of the repair. All three "clicked" but the defective one did not click as easily. It needed to be depressed more than the door latch can would provide. Old age?
When the part arrived, it had three terminals instead of two as shown in the on-line picture but that did not cause any difficulty in using it. It took about 20 minutes to remove and replace the old switch.
All seems to be working well now.
Finding which of the THREE switches was the problem was the most difficult part of the repair. All three "clicked" but the defective one did not click as easily. It needed to be depressed more than the door latch can would provide. Old age?
Read less
Was this helpful?
Thank you for voting!