66513173K706 Kenmore Dishwasher - Parts

The door balance kit helps support the dishwasher door. This kit includes 2 door balance links and 2 door balance mounts with wheels.

Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.

This drain pump is used in dishwashers to remove water from the dishwasher tub. If the impeller in the dishwasher is damaged or the motor has been shorted out and will not drain, it is possible the body is cracked, causing leakage. To prevent this from happening, replace the drain pump. The tools needed for this installation are: Phillips...Read more screwdriver, 5/16 inch nut driver, 5/8 inch wrench, and a flathead screwdriver. Remember to unplug your dishwasher from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for further installation instructions.

This is a door seal, but you may also know it as a door gasket and it is a part for your dishwasher. It provides a leak proof seal between the tub and the door of your appliance. You will need to replace the door seal if you are experiencing leaking from the front of your dishwasher. Once you have removed your old seal, we recommend inspe...Read morecting the groove to make sure there are no food particles or debris caught inside that will impede the installation process.

This part attaches to the lower dishrack.

This water inlet valve controls the flow of water into your dishwasher, ensuring each cycle begins with the correct amount of water. If your appliance is leaking, overfilling, or not filling at all, a faulty valve may be the cause. Designed for compatibility with a variety of models, this replacement part helps restore efficient and relia...Read moreble operation. To ensure a proper fit, always confirm your dishwasher’s model number before ordering. For safety, disconnect the appliance from its power source and wear protective gloves before installation.

Help protect the dishwasher from overheating with this high-limit thermostat. Mounted beneath the tub, it responds to excessive heat by cutting power to the heating element. A failed thermostat may interrupt heating, leaving wash water too cool or dishes wet after the drying cycle. Replacing a faulty unit helps restore the heater safety c...Read moreircuit and proper heating operation. This temperature-sensitive switch works as a protective limit during use. Disconnect electrical power before accessing the underside of the dishwasher or removing any wiring.

This seal is attached to the inner cabinet to reduce noise.

Includes power cord and all necessary parts needed for complete installation of cord.

Handle NOT included. This door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

Sold individually.

Sold individually.