1. Home
  2. 64198459
  3. Instructions

64198459 General Electric Dryer - Instructions

All Instructions for the 64198459
76 - 90 of 210

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Timer was stripped
1 person found this instruction helpful.
  • Mary Ann from Buzzards Bay, MA
  • Very Easy
  • Less than 15 mins
Just placed it where it belonged.
Was this helpful?
Thank you for voting!
Switch not working.
1 person found this instruction helpful.
  • Alan from BELFORD, NJ
  • Very Easy
  • Less than 15 mins
Open the door and removed the part. Installed the new part and started the dryer.
Was this helpful?
Thank you for voting!
Timer Knob
1 person found this instruction helpful.
  • Sharon from FARMERVILLE, LA
  • Very Easy
  • Less than 15 mins
Very repair just put new on and it worked great
Was this helpful?
Thank you for voting!
The timer knob was inoperable
1 person found this instruction helpful.
  • Christel from GREENACRES, FL
  • Very Easy
  • Less than 15 mins
Very simple: I looked up the part number for my timer knob, ordered it from this site and received it one day earlier than expected. I simply attached the knob, and my problem was over. I am very, very satisfied and happy with your immediate delivery of the ordered part.
Was this helpful?
Thank you for voting!
Knob broke and ordered a new one
1 person found this instruction helpful.
  • Christine from ALLEN PARK, MI
  • Very Easy
  • Less than 15 mins
Very easy fix since it was only the knob
Was this helpful?
Thank you for voting!
knob broke
1 person found this instruction helpful.
  • Jim from CRAWFORDVILLE, FL
  • Very Easy
  • Less than 15 mins
Just pushed on new one
Was this helpful?
Thank you for voting!
Replace knob
1 person found this instruction helpful.
  • Dave from DOUGLAS, WY
  • Very Easy
  • Less than 15 mins
No brainer
Was this helpful?
Thank you for voting!
The old dryer knob broke
1 person found this instruction helpful.
  • Charlie from KILGORE, TX
  • Very Easy
  • Less than 15 mins
I took off the old dryer knob and put on the new one
Was this helpful?
Thank you for voting!
Broken knob
1 person found this instruction helpful.
  • Cheryl from LIMA, OH
  • Very Easy
  • Less than 15 mins
Put the knob on and turned.
Was this helpful?
Thank you for voting!
The light bulb in my freezer door burned out.
1 person found this instruction helpful.
  • Peter from HAZELHURST, WI
  • Very Easy
  • Less than 15 mins
Remove the burned out bulb and install the new light bulb.
Was this helpful?
Thank you for voting!
unable to select anything on the wash cycle selector
1 person found this instruction helpful.
  • Rodney from BATESVILLE, IN
  • Very Easy
  • Less than 15 mins
the original knob had cracked and I ordered a new one and replaced it, all is well, thank you
Was this helpful?
Thank you for voting!
Drum was squeaking and making a lot of noise!
1 person found this instruction helpful.
  • Timothy from Rochester, NY
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Wrench set
Took apart the dryer housing fairly quickly, pulled out the drum, and installed the kit. Was fairly simple. Then reassembled. The hardest part was trying to get the belt on properly and reconnect to the motor. Believe it or not, I wasted most of my time on the belt. Should've watched the video better and listened to my wife and her sugges tions.
Read less
Was this helpful?
Thank you for voting!
Belt Broken that turns the drum
1 person found this instruction helpful.
  • Wayne from Williamston, MI
  • Easy
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable)
First I shut off the gas and unhooked the gas line. Then opened the door and removed the screws that hold the top down in the front. I then tipped the top back so I could get to the top of the drum. I removed the screws ( 4 ) inside the door opening and slid the felt seal back. Next I put the belt in the drum and feed part out the crack b etween the drum and the dryer frame, being careful not to cut the belt. I woorked the belt around the crack and pulled it toward the drum. When I got the belt through it was all the way around the drum and I just put the belt over the motor pully and pulled the tensioner back and wrapped the belt over it. Put all the screws back in and the back on and fired it up. Works as good as it ever did.
Read less
Was this helpful?
Thank you for voting!
dryer had a loud sqeaking noise
1 person found this instruction helpful.
  • Barbara from Sugar Valley, GA
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
removed top, 2 hex screws, removed front 2 hex screws & 2 star screws. removed belt, slid drum out. Removed old bearing and replaced with new bearing kit. assembled in reverse.
It would help to have another person assist you.
Was this helpful?
Thank you for voting!
clothes being eaten first then the loud noise
2 of 4 people found this instruction helpful.
  • Ken from Westminster, MD
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
I replaced front and rear bearing.The rear I replaced because of cause and effect.There was some play so I am glad I replaced the rear too. Make sure you order drum slides. Ken
Was this helpful?
Thank you for voting!
All Instructions for the 64198459
76 - 90 of 210