All Installation Instructions for Kenmore Refrigerator 59679549010

Freezer iced up

Let the ice in the freezer melt while installing P trap drain tube

Parts Used:

P-Trap Drain Tube Kit

Dale from MECHANICSBURG, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Center rail broke.

Removed the top glass above the vegetable drawers and slipped the center rail in place. And I would like to add that I would do business with this site again!

Parts Used:

Refrigerator Center Rail

Frank I. from FREMONT, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Broken Glass crisper top

Simple placement of new glass pane into crisper top

Parts Used:

Crisper Glass Shelf Insert

Robert from Southwick, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Plastic food door hinge broke

Removed the food bins and lower shelf. Unscrewed the end cap. Removed the drawer hinge. Re-installed hing on new end cap. Installed the new end cap. Re-installed drawers and shelf. DONE!

Great graphics on the website helped to correctly idenitfy the required part. Part arrived quickly and well packed. One of the easiest transactions ever!

Parts Used:

Pantry End Cap Kit, LH and RH

Michael from Nesconset, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Would not make ice.

Removed the whole ice maker unplug one wire harness replaced ice tray with new one.
Very simple.

Parts Used:

Ice Maker

William from OTSEGO, MI
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

One of the light bulbs went out on my Whirlpool refrigerator.

I changed the bulb but it still didn’t work. I ordered a bulb holder and replaced it and it works properly now. It was an easy repair, remove the bulb, gently pry the bulb holder out with a screwdriver and snap the new one in.

It was useful that under the description of the part in the catalog, it showed that this part was often used to repair this issue. The service was great and the delivery was fast.

Parts Used:

SOCKET

Brian from LAKE CHARLES, LA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Gasket Torn

Removed old gasket and installed the new one. Used a hairdryer to smooth out the edges.

Parts Used:

Gray Refrigerator Door Gasket

Mark from THE VILLAGES, FL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Water not draining to pan. It caused an ice build up under the freezer draw

Remove the grate at the back of the refrigerator. Remove the existing drawn tube. Replace the exiting drain tube with the updated drain tube. Check to see if water was draining properly. Replace the grate. Sit back and have a beer.

Parts Used:

P-Trap Drain Tube Kit

Rich from WINSTED, CT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Random clicking noise

The toughest part was pulling the refrigerator from the wall....After removing the back-bottom access panel the compressor is right there with the Start-Dev and Cap..Took a few min to remove and install new parts....Very Simple and works great...no more clicking..

Parts Used:

Refrigerator Capacitor

Refrigerator Compressor Start Relay

Mark from SAN DIEGO, CA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

broken nipple/hungry kids

Took bottom 2 shelves out. 2 screws held assembly in to main cabin. Remove them then 2 additional screws held drawer bracket in place. Easy yet patience and finesse is needed

Parts Used:

Pantry End Cap Kit, LH and RH

Refrigerator Pantry Drawer Door Cover

Michael from potomac, MD
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Seal would not stay on, letting cold air out of ice maker - did not make ice.

The old plactic ring can be removed with flat bladed screw driver, starting on the right side prying it up worked best for me. The new seal snaps in only one way take your time to get it wright.

Parts Used:

Seal

Larry from PALMDALE, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

broken pantry drawer lid

took out old lid, took out drawers above this drawer to make it easier to work on. installed new drawer simple by hand with no tools. put other drawers back. very simple no tools needed.

Parts Used:

Refrigerator Pantry Drawer Door Cover

robert from ROCHESTER, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

pantry lid cracked

The broken one just popped out and the new one popped right in! This company shipped out the part I needed immediately I had it in two days!! I highly recommend them!!

Parts Used:

Refrigerator Pantry Drawer Door Cover