All Installation Instructions for Kenmore Refrigerator 59679242015

Deli Lid Tray broke and was unable to glue back.

Ordered the part. When came in I took it out of the box and slid the two end posts into the provided holes. Lid fixed in less than 5 minutes. Part came in on the third day because I ordered on Friday afternoon.

Parts Used:

Refrigerator Pantry Drawer Lid

Linda from LOVINGTON, NM
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Middle section between the two French doors was broken by a four year old

We ordered the part by phone at about 4pm on Monday, and it arrived via Fed Ex at 10:30am the next day. WOW. My husband fixed it in about 5 minutes. Removed the old mullion with a socket set thing and screwdriver. Unscrewed the screw, slid the mullion up, disconnected a wider that is inside. Then he lined up the top and bottom plastic parts, reconnected the new wire, slid the new mullion in place, and screwed it on.

Parts Used:

Refrigerator Flipper Assembly

Kathy from Ellington, CT
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set

7 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Bulb wouldn't light up, when freezer drawer was pulled open

The repair didn't get done, because both times that I requested a 25-Watt Light Bulb, I received a 3.6 Watt bulb instead & neither one worked. So I tried testing the original bulb in a table lamp & it worked. So I sense that the problem may be in the switch that allows the light to turn on when the drawer is opened & shut off when the drawer is closed.

Parts Used:

Light Bulb - 25 W

Dennis from LOUISVILLE, KY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Very easy, made a huge difference

Took off the old gasket and pushed in the new one.
Note on the left door, you will need to remove the center piece. suggest watching youtube video.

Parts Used:

Refrigerator Door Gasket - Right (White)

Bart from Ocean View, DE
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

The toe grille broke when we 1st put it on

We snapped the new one on correctly this time.

Parts Used:

Refrigerator Kickplate Grille

Rana from Pittsburg, KS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

My Whirlpool Fridge and freezer would not get cold.

My Whirlpool model (GB2FHDXWS09) Fridge and freezer would not get cold. The compressor would turn on for about 5 seconds and turn off. I called parts Direct and they knew it was the Capacitor right away. I also ordered the Start Relay just to replace it as well, that was my choice.

Received the parts super fast. I chose to pay for faster shipping.

Super great place to shop, watch help videos and get the answers you need for what you need. Super happy with everything about this company and the person that helped me on the phone to place the order and confirm I was ordering the right part.

Done and working. Took me about 5 minutes. Everything is plug and play besides taking a few screws off the back.

Thanks Team !

Bryce

Parts Used:

Start Relay

Capacitor

Bryce from STUART, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

light bulb in water ice freezer door went bad

I didn't. Don't know how to get to light bulb to change it for this specific model

Parts Used:

Light Bulb - 40W

Carl from RIVERSIDE, CA
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers

8 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Helpful to have instructions

Since there were no instructions, I was a tad hesitant but dove in. I was just replacing the right end cap, not the left. Removed the involved shelf as well as the two drawers above. Undid the three screws involved and carefully removed the slide rail end cap as well as a part in the back that was attached. That was the hairy part. It took a bit of time to remove it since everything seems so brittle but I was careful and got the assembly out without breaking anything. Also had to remove the slide rail and humidity control. Nothing to removing and replacing the slide rail. You just have to put it back correctly oriented. This was easy. I just looked at the one on the left, which I hadn't removed. Most time consuming part was cleaning things that were normally inaccessible, before re-installing.

Parts Used:

Drawer Slide Rail End Cap Set

Tim from WINTER PARK, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

RH door closure broke

Removed the door and replaced the broken door closure bushing. I had courteous help and responce from Parts Select people. Excelent turn around time on parts delivery.

Parts Used:

Refrigerator Door Closer (White)

Estel from Luling, TX
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers

10 of 21 people found this instruction helpful.

Was this instruction helpful to you?

The deli drawer on this refrigerator rides on two plastic hinges on the end caps and opens and closes when you slide the drawer in and out. One of the hinge broke off the end cap and would not let the drawer stay in place or operate properly.

I contacted partselct to see if I could get the end caps with new hinges to correct the problem. My customer service contact was very professional and a huge help in helping me select the correct parts. When the parts arrived I was amazed they were genuine whirlpool parts, fit perfectly, and were easy to install. I have other parts to order and will use partselct again. I appreciate everything they did for me to solve this problem.

Parts Used:

Drawer Slide Rail End Cap Set

Gene from PADUCAH, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Broken black plastic spring mechanism inside freezer rail

Remove rail and removed broken black plastic spring mechanism with new one and then replace rail.

Parts Used:

SLIDE

Ronald from WESTERVILLE, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

7 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Refrigerator and freezer not cooling

It was easy to replace the start and run capacitors. But did not fix my problem, also replaced the evaporator fan still not fixed. Pulled refrigerator out of RV and ordered a new one.

Parts Used:

Start Relay

Tom from FENTON, MO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Did not need filter

Unscrew filter. Screw on filter bypass

Parts Used:

Refrigerator Water Filter Bypass

Geraldine from MUNDELEIN, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Ice tray sticking. No ejection of ice. Motor not working properly

Took out ice maker. Then unscrewed tray after opening old turn motor clock panel and carefully detaching wires from socket(s) where needed. Put in and screwed in new tray with the new motor clock. Replaced wires into new sockets. Put the whole maker back into place. Makes great ice.

Parts Used: