59669928011 Kenmore Refrigerator - Instructions

Removed glass shelf and replaced center rail with ease.

I simply replaced the rail.

I replaced with new one

Found the correct part online. Ordered on a Wednesday morning. Learned that it had been shipped that same day. Recieved in on the following day, and in 5 minutes, the replacement took place. Piece of Cake ! The most remarkable thing was the time it took to order and receive the product. Very impressive !

The rail had broken off, so there was nothing to remove, except the crisper drawers. I had called an amana repair service and the repairman told the part was about $9 and the cost to install was $127. When I almost fainted, he told me I could probably do it myself. Wow, was he right! I ordered the part, it came in about 2 days, I looked at the rail, removed the glass shelf, hooked the rail into the little opening at the back, and bang! All done. It took me 10 seconds!!

I took the shelf and drawers out and replaced the rail, put the shelf and drawers back in. Easy as pie.

Snapped old one off, snapped new one on

I watched your video. The part came faster than expected. The video was very helpful. I am very happy with the service.

Removed both crispers and shelf . Inserted new rail as explained in video. Replaced everything.

Followed easy instruction video. It was like new in fifteen minutes.

Removed the glass shelf, position the rail in its slots and replaced the glass shelves.

Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you

The instruction video was so helpful. I watched it before I ordered the part to be sure I was able to make the repair. The replacement part arrived quicker than I expected. Cleaning the shelf & bins was the most time consuming part of the job. The replacement part fit in place perfectly. My fridge is good as new again!

Noted the Damper Assemby in the upper rear of refrig section,was always staying open during checks for problems. Controls appeared to be controlling temp changes when adjusted. Pulled the damper assemby after removing two screws holding the diffuser/cover(diffuser pops off with screwdriver) Damper assembly snaps out , unplug wires, snap new damper assembly in place, reconnect wires at the plug, replace cover with foam insulation, secure with screws replace diffuser snaping in place. Recheck settings for desired temperatures.

Removed the six screws holding the bottom access plate found at the rear of the refrigerator. This gives you easy access to the run capacitor that has a retaining clip. Remove the wire clip and pull out the capacitor (it has two quick disconnect terminals). Reverse the process using the new run capacitor to complete the repair.