59667993608 Kenmore Refrigerator - Instructions

Removed & Replaced

The installation video for condenser fan motor helped a lot to know how to disconnect the old fan motor and connect the new one. So easy just know how to remove and put back the fan gently, observe carefully where is the center and the connector position; 15 min after everything was done and the unit works well to date.

Unsnapped and pulled off small cover exsposing two phillips head screws. I removed larger cover and styrofoam insert fully exsposing the damper unit. i unplugged same and with a 1/2 inch wood chisel was able to release the "snaps" holding the old unit in place. Simply reverse procedure to install new unit.

Just set the glass shelf onto frame perfect fit

Followed the demo film on line.
Good instructions

First off, I learned from YTube how to go about figuring out what might be wrong & how to fix it. I watched numerous videos and narrowed it down to the damper as the part to be replaced. I learned how to use the Jazz Board in the fridge to test components & verified the damper wasn't getting signal to open/close. I removed the old damper & put in the new one following what I had seen on the videos. I found a video that had the same type of damper assembly as my fridge & used it to show me how to remove & replace the damper. This was the 2nd part I had to replace to get my fridge up & working. I spent a total of 224.00 on parts and now the fridge is quieter than it's been in years. Finally, if a 66 year old woman can do this, so can you. Just watch YTube & also PartsSelect also has videos also.

remove two crispers and glass top . Replace rail.
Note
This is 3rd time this part in about 5 years has needed replcement. If there is a next time I would expect a "freebe". Service is great and replacement rail came in jig time.

It was so easy just opened the box took out the shelf and plaed it where the old one was. This was the easiest repair ever. Thank you for this website!

The repair was easy ... but this Part Select will be my favorite forever!! The people on the phone were awesome ... the part came immediately ... and we couldn't be happier!!!

Thank you so much!! You're the best!!!

Watched the video. Everything went great, Super simple

removed drsws and shelf put new center rail replaced draws done

Removed rear cover, removed fan and than drip tray. install new tray and reassemblied

Just like the video showed me.It still does not work. Have to turn it off and on to make it start up.I also replaced thermostat in freezer. Does not work.

I took the shelf and drawers out and replaced the rail, put the shelf and drawers back in. Easy as pie.

I had to remove the 2 drawers, naturally, but then found I also had to remove the glass shelf and bracket that holds them, because the end of the center rail had broken off and stuck in the recess of the shelf. No problem. Washed the shelf and the end piece fell out, eliminating the need for pliers or tweezers. Put the new center rail in place, replaced the shelf, replaced the 2 crisper drawers and, "voila" - good as new (until next time some big, strong guy slams the crisper drawer). Thanks for quick delivery; I don't often get in the mood to fix things, so when I do it's nice the part arrives before my fixing-muse flies away.