59667992603 Kenmore Refrigerator - Instructions

It was easy to find on the site because of the great diagram of my Amana and it was super easy to repair- just had to drop it in place - paid 20 dollars with shipping - Im sure it would have cost me over $100 if I would have called a repair man

The unit has two fans on it. One is located in the back and the other is locate inside the freezer section behind the panel. Remove the four bolts holding the door to the sliding rack. Remove the ice machine. Remove the back panel. Noticed that the fan was covered in ice thus shorting the fan motor. Tested for voltage to the fan was good. Replaced evaporator fan motor and unit works perfectly

First I watched the How To video on the repair process. Then I followed the steps on the video and was finished in no time at all. Very simple! The ordering and delivery of the product was also quick and efficient.

Removed back cover. Removed fan with mount which was a little difficult. Installed new pan and parts that were removed. Part came in one day. Great service.

Thanks to some reviews we found online about replacing gaskets, ours went very smoothly. One person said to soak the gasket in hot water, which we did til it was very soft. Installed like a breeze. Then, the same person said to tape the door closed after installation, we did that too. The gasket looks like it was professionally installed and we have never done it before. Thanks!

Removed top glass and inserted the rail

Watched the video, did exactly as shown. If an 81yr old female can do it, who needs a handyman !! Thanks for the speedy delivery and for making it so easy for me to understand ! molly

I followed the video instructions and had no problems changing the part.

The website, customer service, part, and one day delivery were very amazing to my husband and me. We will deal with PartSelect whenever possible. EVERYTHING re: the transaction including wonderful video instructions were A++ Many thanks

I simply watched the repair video and did it! Super easy, needed start device and capacitor. As easy as unplugging the old and adding the new. The video helped and gave me confidence. Wives can fix fridges too! Saved me $2500. Looks like I'll need a new excuse if I want a new fridge.

These plastic storage refrigerator racks can break relatively easily. Fortunately, the replacement of the center crisper rail is very easy. Just remove all the food items from the flat shelf above the crispers. The flat shelf (glass in our model) comes out as well as the crispers. When you remove the shelf and crispers, the center crisper rail is replaced by turning the frame upside down. It fits right in and is secure when you turn the frame upright. Don't try to make this replacement in situ, too many fragile plastic tabs that can possibly break.

Lift the glass shelf up, slip center rail in place, lower shelf. Time 1 minute.It takes more time to remove everything on the shelf than to replace the part.

Unplug the refrigerator and pull it out so you can work behind it.I had to get a helper to lean the refrigerator forward and let it rest on a towel I placed on the countertop. The tray was underneath the refrigerator near the back so I leaned it forward enough to remove the metal plate that holds the tray in place. I placed a scotch behind the front wheels to keep it from rolling backward off the counter it was resting on. I had to remove the cover from the unit on the lower back side of the refrigerator to see how the tray was moumted. Once you remove the plate you have to slide the fan off the tray and then you can remove the tray. Simply reverse the whole process to install the new tray, upright the refrigerator and plug it back in to the outlet.

Received part as promised in perfect condition, unpacked it, washed it and slid it into place.

First of all, I watched the very helpful video on your site, when the part arrived, I installed the rail all by myself...I am a female, and it was very easy..thank you for the video information, very helpful..