59666133703 Kenmore Refrigerator - Instructions

Pulled out broken part, slid in new one, put drawers back in. Works great. Website to find and order part was super easy to use and part came quickly. Two thumbs up.

Noted the Damper Assemby in the upper rear of refrig section,was always staying open during checks for problems. Controls appeared to be controlling temp changes when adjusted. Pulled the damper assemby after removing two screws holding the diffuser/cover(diffuser pops off with screwdriver) Damper assembly snaps out , unplug wires, snap new damper assembly in place, reconnect wires at the plug, replace cover with foam insulation, secure with screws replace diffuser snaping in place. Recheck settings for desired temperatures.

Clean off the glass shelf, remove drawers and shelf, pop in replacement rail, put everything back in fridge. Replacing the part is the easy part, what I would like to know is why this is the second one I have had to buy this year. There must be a problem with the replacement parts that they break so easily. This time, I bought 2, so that i have a spare - fortunately, the price is reasonable.

Removed the drawers and shelf with glass t.op and center rail, installed new one (popped out and popped new one in). Took all of 5 minutes. Easy to order on line. Should use usps for shipping it is cheaper.

The instruction video was so helpful. I watched it before I ordered the part to be sure I was able to make the repair. The replacement part arrived quicker than I expected. Cleaning the shelf & bins was the most time consuming part of the job. The replacement part fit in place perfectly. My fridge is good as new again!

Removed the six screws holding the bottom access plate found at the rear of the refrigerator. This gives you easy access to the run capacitor that has a retaining clip. Remove the wire clip and pull out the capacitor (it has two quick disconnect terminals). Reverse the process using the new run capacitor to complete the repair.

Took off the shelf abovethe rail and slid into the receiver in back and front. BTW, cant say enough good about the customer service received from Part Select! They were awesome!

Remove plastic vent cover. Just snaps out. Take out two screws that hold damper cover on. Unclip and unplug damper assembly. Snap in new assembly and plug in. Replace covers. I was pretty sure this would fix my problem after observing the damper for several days. It would stay open and when I moved it by hand it would open a little more and then close. Easy fix!

Removed the two drawers and shelve. Inserted the new crisper rail. Replaced the two drawers and put the shelve back in. Took maybe 10 minutes. Did not need any tools.

I removed the glass on top of the Crisper and replaced the Rail and then replaced the glass. Done

I was so happy to find that i could order the part online and not have to call a repairman and pay for a service call. The prat shipped in one day! It was very easy to install. Only tip i will give is, make sure you put it in the right direction. If placed in wrong the drawers won't open.

It took more time to open the shipping box than to slide the drawer into place :-)

I did it exactly how the video that was shown when I purchased the new rail. Following those instructions worked perfectly.

Removed the storage bins. Removed the whole shelf, remove the glass part.(clean everything while you are at it, which is why it took 15-30 minutes) Lift out old rail and replace it with the new, reinstall shelf and glass. If you choose to not to clean, just take out the glass shelf, replace rail and put it back in. .

After plugging in the new relay to no avail. I replaced the thermostat. That fixed the problem.