59666032603 Kenmore Refrigerator - Instructions

Removed top glass and inserted the rail

Watched the video, did exactly as shown. If an 81yr old female can do it, who needs a handyman !! Thanks for the speedy delivery and for making it so easy for me to understand ! molly

I followed the video instructions and had no problems changing the part.

The website, customer service, part, and one day delivery were very amazing to my husband and me. We will deal with PartSelect whenever possible. EVERYTHING re: the transaction including wonderful video instructions were A++ Many thanks

I simply watched the repair video and did it! Super easy, needed start device and capacitor. As easy as unplugging the old and adding the new. The video helped and gave me confidence. Wives can fix fridges too! Saved me $2500. Looks like I'll need a new excuse if I want a new fridge.

These plastic storage refrigerator racks can break relatively easily. Fortunately, the replacement of the center crisper rail is very easy. Just remove all the food items from the flat shelf above the crispers. The flat shelf (glass in our model) comes out as well as the crispers. When you remove the shelf and crispers, the center crisper rail is replaced by turning the frame upside down. It fits right in and is secure when you turn the frame upright. Don't try to make this replacement in situ, too many fragile plastic tabs that can possibly break.

Part Select's easy to use website helped me fine the part quickly and tips on change out. It was so easy, I only regret that I waited so long to so it.

Lift the glass shelf up, slip center rail in place, lower shelf. Time 1 minute.It takes more time to remove everything on the shelf than to replace the part.

Unplug the refrigerator and pull it out so you can work behind it.I had to get a helper to lean the refrigerator forward and let it rest on a towel I placed on the countertop. The tray was underneath the refrigerator near the back so I leaned it forward enough to remove the metal plate that holds the tray in place. I placed a scotch behind the front wheels to keep it from rolling backward off the counter it was resting on. I had to remove the cover from the unit on the lower back side of the refrigerator to see how the tray was moumted. Once you remove the plate you have to slide the fan off the tray and then you can remove the tray. Simply reverse the whole process to install the new tray, upright the refrigerator and plug it back in to the outlet.

Received part as promised in perfect condition, unpacked it, washed it and slid it into place.

First of all, I watched the very helpful video on your site, when the part arrived, I installed the rail all by myself...I am a female, and it was very easy..thank you for the video information, very helpful..

Not including the time I spent to thoroughly clean the shelf, 2 crisper bins and the bottoms and sides of the inside of the refrigerator, having been faced with the obvious opportunity, this job takes about 30 seconds! After clearing, carefully lift the glass shelf from its frame, remove the broken rail and insert the new rail. Lower the glass shelf into the frame. Voila! Fini!

just replaced the one part-fit right in---great

Pulled out broken part, slid in new one, put drawers back in. Works great. Website to find and order part was super easy to use and part came quickly. Two thumbs up.

Noted the Damper Assemby in the upper rear of refrig section,was always staying open during checks for problems. Controls appeared to be controlling temp changes when adjusted. Pulled the damper assemby after removing two screws holding the diffuser/cover(diffuser pops off with screwdriver) Damper assembly snaps out , unplug wires, snap new damper assembly in place, reconnect wires at the plug, replace cover with foam insulation, secure with screws replace diffuser snaping in place. Recheck settings for desired temperatures.