All Installation Instructions for Kenmore Dishwasher 58714014411B

door falls easily

Replaced two springs

Parts Used:

Door Spring

Lawrence from St Simons Island, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Our dishwasher spray arm got stuck on a rogue dish and melted on the heating element

The spray arm simply clips to a base in the center of the dishwasher tub. The repair takes 30 seconds - the lower rack slides out, twist the base of the old spray arm to lift it off, and snap the new one on.

Parts Used:

Lower Spray Arm

Mackenzie from MADISON, WI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Two of the tub wheels cracked and broke off.

Unscrewed the old ones, new ones come with screw built in and recrewed the new ones in. So easy.

Parts Used:

ROLLER ASSEMBLY

Sharon from HAMPTON, NH
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Water leaking, spray arm melted

This dishwasher is pretty old and I live in a rental. When I moved in, the dishwasher leaked every time and it would had been nearly impossible to get the landlord to do any work. I read other repair stories on partselect and figured out it was the spray arm assembly. At some point the arm got detached and laid on top of the heater coil. Once it was melted and the water holes were distorted, the water shot at the door in some way to leak out the front. I replaced the part by just pushing the center part until it clicked on the bottom---- no tools were needed! The dishwasher works like a champ now. The dishes get clean the first time and no leaks on the floor. I read from other comments that the part was blue and it didn't match the original color. That wasn't as important as having a functional dishwasher. The delivery was delayed because of the health crisis, but once the warehouse sent an email that the part was shipped, I received it as was promised. All in all, I was pleased with the service and part. If there is another situation in the future, I would definitely consider using partselect again. Thank you

Parts Used:

Lower Spray Arm

Peter from TAUNTON, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Spray Arm melted easy replacement

Popped it in and done

Parts Used:

Lower Spray Arm

Amanda from HAYESVILLE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

lower spray arm came off and melted on the header coil

took old one off by hand, snaped the new one in place by hand

Parts Used:

Lower Spray Arm

steve from PT CHARLOTTE, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Dishwasher Sprang a Huge Leak

I pulled out the dishwasher and found the inlet tubing had a tear in the accordion part of the tube. I searched online for the model number and was directed to PartSelect. I ordered the inlet tubing, and it only took a few days to get to me. I then watched the video and was able to install the new tubing.

PartSelect is a life saver and I saved lots of money by not having to call a repairman.

Parts Used:

Dishwasher Water Inlet Tubing

Rita from MEDANALES, NM
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

The heating element (ring) showed signs of wear

I followed the steps on YouTube.

Parts Used:

Heating Element

Leonard from N ROYALTON, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set

1 person found this instruction helpful.

Was this instruction helpful to you?

Broken Door Spring

First remove the kick plate.
Then look with a flashlight & mirror to make sure which, the spring and or the Spring Linkage are broken.
With the door open, to have less tension on the spring, replace the spring and or the spring linkage.
Attach the kick plate

Parts Used:

Door Spring

Arlene from Houston, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

My heating element was cracked

Remover the cracked heating element with the new heating element.

Parts Used:

Heating Element

Jimmy from COMSTOCK PARK, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench set

1 person found this instruction helpful.

Was this instruction helpful to you?

Brass nuts holding heating element in place had split

All you have to do power down the unit, then disconnect the power connections at the element and remove the old nuts and replace them with the new ones and tighten. Don't tighten too much, the element has a rubber seal that just needs the nut to snug it up.

Parts Used:

Heating Element Brass Nut

Jonathan from New Hope, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Wrench (Adjustable)

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Spay arm came off hit the heater and burned a hold in the side

Easy just snapped on works going again like new

Parts Used:

Lower Spray Arm

marcus from NORMAN, OK
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Some of the silverware slip thru the silverware holder. During the drying cycle the exposed silverware was to close to the arm and melted an area of the arm which caused water to seep out onto the kitchen floor.

To remove the spray arm just squeeze the sides pull up and replace the new lower spray arm in it's place. Just push down.

Parts Used:

Lower Spray Arm