580753000 Craftsman Pressure Washer - Parts

The engine mounting hardware kit is sold as a set that contains all the necessary parts. These are genuine items that are supplied by the original equipment manufacturer for use with pressure washers made by Briggs & Stratton, Troy-Bilt, and Snapper. A wrench set might be necessary during the installation of these parts. These items might break over time and will need replacing.

This genuine OEM sourced replacement part is designed for use with pressure washers. If the pressure washer runs too long with out the release of water from the sprayer, the water will heat up inside the pump. Once the water gets to a certain temperature the thermal valve will open and release the pressurized hot water, to protect the pum...Read morep. If this happens too often you have a greater chance of damaging your pump. This valve consists of one (1) metal and one (1) plastic piece. To complete this repair you will need a wrench.

This replacement trigger gun assembly is specially designed for use with a variety of pressure washers. It is the essential part of the unit that allows user to direct and control the spray. Please note the wand and the hose are both sold separately. This pistol assembly is made out of plastic with metal fittings. This handle is only for pressure washers up to 3000-psi using M22 hose connector.

This item is an authentic OEM sourced O-ring kit that replaces worn or damaged O-rings for the gun, hose and wand.Unfortunately, over time o-rings will wear out and they may begin to crack eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure. A screwdriver and a wr...Read moreench set might be needed to take apart and reassemble the equipment. Note, this kit is sold as an individual item.

This replacement hose is a genuine OEM sourced item that specially produced for use with Craftsman pressure washers. This 25 ft. high-pressure hose is made of durable rubber with metal fittings and it is sold individually. It can be used on pumps that produce up to 2600 PSI. Over time the material may deteriorate or get damaged eventually requiring replacement to maintain a working unit.

This is a genuine manufacturer sourced replacement anti-vibration mount which is specially designed for use with Briggs and Stratton and Troy-Bilt equipment. It is one of the mounts which helps to secure the motor to the frame. The rubber material will help to reduce vibrations from a working unit. Over time the part may wear out and crac...Read morek eventually requiring a replacement. Please note, this high-quality component is sold as an individual item.

This is a genuine Briggs & Stratton replacement part. The mounting hardware is commonly found on pressure washers. This kit includes four metal bolts and washers, and is used to secure the pump on the machine. You will require an Allen or hex wrench when replacing this item. This part is sold individually.

This is an original part from Briggs & Stratton. The vent cap with o-ring is constructed of plastic, and is made for use with several pressure washers. This component is fitted into the housing, and is designed to vent air when priming the pump. This item is sold individually. A wrench may be necessary for making the replacement.