Models > 3KSM150PSTMH0 > Instructions

3KSM150PSTMH0 Whirlpool Mixer - Instructions

All Instructions for the 3KSM150PSTMH0
121 - 135 of 186
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No rotation
I was very happy with the customer services department and the support I received in identifying the part I needed for the repair. I received an email confirming my order with all details. I do wish you had a more cost effective shipping alternative, like Priority mail.
The repair went well and the mixer is back in business, for making those Chocolate Chip Cookie and brownies if you know what I mean.

Thank you
Ron Ashby
Parts Used:
Mixer Worm Gear & Bracket
  • Ronald from El Paso, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
My wife was complaining of a loud grinding noise.
I replaced the brushes. I didn't realize that I've put one of them wrong. Reminder for next time the brushes have to touch the rotor of the motor. It took me a little bit to understand but the brushes can go in and not touch the rotor. It works very quietly now. Thank you PartSelect for your infos and knowledge.
Parts Used:
Mixer Motor Brush
  • Nick from Naperville, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken worm gear
Knob fell out of the front of the mixer into the bowl and jammed the beater. This caused the motor to strip the plastic worm gear. Open unit to investigate and found about 4 teeth missing out of the worm gear. Ordered a replacement. Installed the new gear once received in about 30 minutes. Wife is now happy again. Just need to make sure you pack enough gease into the new gear before reassembling the unit.
Parts Used:
Worm Gear
  • Dallas from Atlanta, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The worm gear was damaged
I how the video for replacing the worm gear on your website. It help me a lot. I followed step by step instruction display on video. It was great help.
Parts Used:
Worm Gear
  • Ashok from Sterling, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
the dough hook was chipped
replaced
Parts Used:
Mixer Dough Hook
  • Robert from Belle Fourche, SD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Thumb screw
the plastic covering the thumb screw cracked almost half way and lost the piece....so the new one is being used to replace this old one...very easy to install
Parts Used:
Mixer Thumb Screw
  • Linda from Lynden, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Wire Whip was coming apart
Replaced it with a new part. No installation or repair to maching was necessary
Parts Used:
Wire Whip Mixer
  • Lois from Albuquerque, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Pin fell out of neck
Placed pin in the hole...some wiggling had to be done for a tight fit. Installation complete!
Parts Used:
Mixer Dowel Pin
  • Tiffany from San Antonio, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Plastic worm gear stripped
The plastic worm gear was stripped,I took it apart first then cleaned out all the old grease so when the new part came it together like a charm.
Parts Used:
Worm Gear
  • Pete from Tracy, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
wire whip brokrn
Just screwed it in
Parts Used:
Wire Whip Mixer
  • Lawrence from Craryville, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Brush's Wore
Change brush's
Parts Used:
Mixer Motor Brush
  • Gary from Scottsburg, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Food mixer suddenly stopped without burnning smell
Just change the motor brush. That's it! It work well now. Thank you, Partselect!
Parts Used:
Mixer Motor Brush
  • Takahiro from Arlington, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
This mixer was found, in apparent brand-new shape, discarded at our trash transfer. It had a stripped worm gear.
I disassembled the mixer head, removed old grease and cleaned interior completely. I noticed the worm gear was broken and concluded some lazy person hadn't bothered to find out why this otherwise pristine machine didn't work. I ordered the parts from you, installed a new worm gear, repacked with food grade grease, put on the new gasket, reassembled and turned it on. TA DA!!! Since I have a 50 year old KitchenAid in fantastic condition, I gave this one to my neighbor. She cooks for about 15 people on Sundays and has never had a stand mixer until today.
Parts Used:
Worm Gear Mixer Flat Beater Mixer Transmission Case Gasket
  • Kathryn from Granville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
machine not running-broken worm gear?
After I dropped a part of the shield into my mixer the motor screamed and I unplugged the mixer. I found out I had a broken worm gear. I then order the part and per the helpful video I did the repair and I also changed the brushes my mixer is up and running waiting for the holiday baking season thanks to Part select.com Very easy Instructions to follow I am very happy with the results. Thanks Barbara
Parts Used:
Mixer Motor Brush
  • Barbara from Rockdale, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
mixer stopped working
i followed the instructions in video. Thank you joe
Parts Used:
Mixer Worm Gear & Bracket
  • Joseph from South Port, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 3KSM150PSTMH0
121 - 135 of 186