363D Kenmore Dryer - Parts

This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if this part is an issue if your dryer is unable to tumble properly or is very noisy. Damage can come from reg...Read moreular use. The part attaches to the outermost side of the bearing. Check both slides for signs of wear, because they often wear at the same rate, and should be replaced at the same time; there are 2 of these particular slides per dryer. This part is sold individually, so you'll need to purchase multiple parts if replacing both at the same time.

This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.

Note: The insulators on the housing are NOT sold separately.

A dryer's idler pulley wheel serves to help the belt to rotate the drum.

This lint filter comes with the plastic filter frame.

This wheel attaches to the motor.

This screw is sold individually.