My Orders
- Home
- 3639644284
- Instructions
3639644284 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Change bulb
3 of 8 people
found this instruction helpful.
-
Louis from LEAGUE CITY, TX
- Really Easy
- 30 - 60 mins
-
Nutdriver
Easy
Was this helpful?
Thank you for voting!
refridge was delivered WITHOUT the ice tray shelf
5 of 14 people
found this instruction helpful.
-
Charles from Phoenix, AZ
- Difficult
- 15 - 30 mins
-
Nutdriver
First I had to order the part. The part arrived quickly, but without mounting hardware or instructions. It was easy enough to determine the placement of the shelf, but had to locate mounting screws from the hardware store, drill two holes, secure the shelf.
Was this helpful?
Thank you for voting!
Light burnt out.
2 of 8 people
found this instruction helpful.
-
Roscoe G from ROCHESTER, NY
- Very Easy
- Less than 15 mins
Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.
Was this helpful?
Thank you for voting!
broken crisper drawer support
-
Richard from Owls Head, ME
- Really Easy
- Less than 15 mins
quick and simple--removed the old one and slid new part in on same support pins.I had the new part via UPS LESS THAN 24 HRS.FROM THE TIME I PLACED THE ORDER! THANKS, SOMEONE IS REALLY ON THE BALL.
Was this helpful?
Thank you for voting!
no problem
-
ED from COAL CITY, IL
- Easy
- Less than 15 mins
-
Screw drivers
It was easy
Was this helpful?
Thank you for voting!
added an additional shelf
-
Lonnie from Covington, LA
- Really Easy
- Less than 15 mins
just pushed it in ! THANKS FOR THE GOOD SERVICE
Was this helpful?
Thank you for voting!
Fridge not cooling
-
Pedro from Miami, FL
- Really Easy
- 15 - 30 mins
-
Screw drivers
Fairly easy I pull the fridge foward and remove the backing board and notice the fan wasn't working, so I remove the fan and bench tested and it was burned then I clean the condenser with compress air if you don't have air then a vacuum cleaner works then once the part arrived I install it the now if working very good
Was this helpful?
Thank you for voting!