- Home
- 3639615613
- Instructions
3639615613 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The Ice Bucket was misssing from a Rental Unit .
-
FRANTZ from PLANTATION, FL
- Really Easy
- Less than 15 mins
I just put the Ice Bucket under the Ice Maker.Problem solved.
Was this helpful?
Thank you for voting!
ice maker very slow and arm that controls amount of ice sticking and quit making ice
-
Grimes from Bartlett, TN
- Really Easy
- 15 - 30 mins
-
Nutdriver
took 1 screw out and removed ice maker and slid new one in and replace screw and connected power cord
Was this helpful?
Thank you for voting!
Ice Maker stopped making ice.
-
Charles from Edmond, OK
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
Ice maker was side mount instead of rear mount as shown in previous insructions. Removed one screw and slide ice maker forward. used flat head screw driver to undo the ice maker plug. The ice maker came right out. Removed old ice maker fill cup and put it on the new ice maker. Slide the new ice maker into place and used the same screw to
... Read more
secure it. Pluged it in and turned on the ice maker. Had new ice in a couple of hours. It comes with a round plug to square plug adapter, new fill cup and fill tube, all of which I didn't use.
Read less
Was this helpful?
Thank you for voting!
Was not making ice cubes
-
Bob from JASPER, GA
- Really Easy
- Less than 15 mins
-
Screw drivers
Only needed to remove one screw, slide unit out and disconnect the power cord. Theb reverse the above operation to install the replace ice maker unit. Quick and extremely easy....
Was this helpful?
Thank you for voting!
Frig was not making ice.
-
robert jr from east rutherford, NJ
- Really Easy
- Less than 15 mins
-
Nutdriver
Removed the faulty ice maker in about two min.. New unit was installed in approx. five min. Watched your video prior to installation and it helped greatly.
Was this helpful?
Thank you for voting!
no ice
-
Richard from Las Cruces, NM
- Really Easy
- Less than 15 mins
-
Nutdriver
Followed the video, very simple
Was this helpful?
Thank you for voting!
Was not making ice
-
Colleen from Yorba linda, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Took old part out , put new part in. Was so easy thought we did it wrong. Ice maker working great, have lots of ice now. Thank you. Colleen
Was this helpful?
Thank you for voting!
ice maker was leaking water. Cubes were sticking inside tray.
-
Carl from Abilene, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
Reviewed video which was very helpful. Loosened two philips head screws, lifted up ice maker, unpluged power suppy and reinstalled. One of the easiest replacements ever!!
Was this helpful?
Thank you for voting!
Ice Maker stopped working
-
William from San Tan Valley, AZ
- Really Easy
- 15 - 30 mins
-
Nutdriver
Took out one hex screw, disconnect electric couplings, pulled original ice maker out and found that the water supply line to the ice maker was frozen solid as well as the shute cup. Used hair dryer to thaw out the line and the cup reinstaled old ice maker and it worked fine. Did not have to use the new part at all at this time. Am keeping
... Read more
new part for future use.
Read less
Was this helpful?
Thank you for voting!
No Ice...
-
Eduardo from Arlington, VA
- Really Easy
- 15 - 30 mins
-
Nutdriver
Super easy, had my 15 year old do it (with my supervision).
Followed very clear Instructions that come with the replacement...
But, he could not get to the plug location until he removed 4 screws holding the motor assembly that spins the ice in the drawer and moved it out of the way...
Followed the rest of the instructions. ... Read more ..
Works like a charm.
Followed very clear Instructions that come with the replacement...
But, he could not get to the plug location until he removed 4 screws holding the motor assembly that spins the ice in the drawer and moved it out of the way...
Followed the rest of the instructions. ... Read more ..
Works like a charm.
Read less
Was this helpful?
Thank you for voting!
iCE MAKER LEAKING WATER
-
Roy H from Leesburg, VA
- Really Easy
- 15 - 30 mins
-
Nutdriver
Followed the video demo and would have been done sooner but for limited work space- narrow freezer compartment and the release tabs on the electrical plug. First home repair that the air was not blue and got done in under time allocated.
Was this helpful?
Thank you for voting!