3631438 Kenmore Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Motor froze up on dishwasher
5 of 8 people
found this instruction helpful.
-
Raymond from Oshkosh, WI
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed dishwasher, took off motor, and ordered part. It was delivered in a timely fashion (3 days). Determined which directions to follow. Used screwdriver to hook up motor. Put dishwasher back into cabinet area, made sure there were no leaks before fastening the dishwasher in place. Took about 1/2 hour to complete process. Very satisfie
... Read more
d.
Read less
Was this helpful?
Thank you for voting!
Rinse Aid Fill Cap melted because it landed next to the heating element because it wasn't screwed in
4 of 5 people
found this instruction helpful.
-
Helen from Carol Stream, IL
- Really Easy
- Less than 15 mins
Simply screwed in new cap
Was this helpful?
Thank you for voting!
A mouse chewed through the hoses to the dishwasher
4 of 5 people
found this instruction helpful.
-
THERESA from HENDERSON, NV
- Really Easy
- 15 - 30 mins
-
Screw drivers, Wrench set
Ordered the part online and replaced the hoses. Very easy...took maybe 20 minutes
Other Parts Used:
Was this helpful?
Thank you for voting!
poor dish washing
4 of 5 people
found this instruction helpful.
-
THOMAS from LACONIA, NH
- A Bit Difficult
- More than 2 hours
-
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Read directions. They were poorly drawn. Set them aside. Opened up unit on December 26th. I made careful observation of the wiring, two hoses, one metal bracket, the hose two clamps, and then proceeded. Instructions said 1 to 2 hours, to complete. Ha Ha, perhaps if you've done it before. It was actually really closer to four hours.
... Read more
When done, it worked perfectly. The best part, my wife said: "This was the best Christmas present ever!" That made my day! Dishes are clean again, just like new! Thank you: www.PartsSelect.com.
Read less
Was this helpful?
Thank you for voting!
Dishes not clean after wash,White film all over.
4 of 6 people
found this instruction helpful.
-
Carl from Corpus Christi, TX
- A Bit Difficult
- 1- 2 hours
-
Screw drivers, Socket set
Pulled unit out of cabinet took two top screws out of spinner spray arm and put back together.Old sprayer was plugged up not letting wash go through.Thanks for helping me fix and not replace unit.Saved at least 400.
Was this helpful?
Thank you for voting!
would not drain but washed fine
3 of 3 people
found this instruction helpful.
-
john from nashville, TN
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers, Socket set
easiest way i found to do it was pull dishwashers out from under the cabnet... laided a pillow down in front of the door and turned it on the front side... the part was very easy to get to at this angle....could have done it in less then 5 minutes but took my time to double check everything to be safe....took a total of about 10 minutes..
... Read more
... very happy now no longer need to vacume out the old dish water left at the bottom of the dishwasher...... i think most anyone could do this very easy....
Read less
Was this helpful?
Thank you for voting!
Leaking
4 of 6 people
found this instruction helpful.
-
Holly from Watertown, MA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
I first made a bad assumption that the leaking dishwasher was from the gasket. I replaced the gasket and it still leaked. To find the leak, I took the body off of the dishwasher and ran it to find the leak. It was from the solonoid connection. I took photos of the leaking motor unit and very easily replaced the new motor unit by matching
... Read more
the placement from the photos. The hardest part is tipping the dishwasher on its side and mopping up the water.
It was very easy. All you need is a nut driver and a Phillips screwdriver. Even an over-domesticated, non- tool user can do it.
It was very easy. All you need is a nut driver and a Phillips screwdriver. Even an over-domesticated, non- tool user can do it.
Read less
Was this helpful?
Thank you for voting!
The water inlet valve on the dishwasher leaked.
4 of 6 people
found this instruction helpful.
-
John from Andover, MN
- Really Easy
- 15 - 30 mins
-
Screw drivers, Wrench set
The repair was very easy and straight forward. I removed the electrical wires, removed the two hose's and then removed the old valve from the dishwasher frame. To install the new valve, I just did everything in reverse. No problem and I saved about $80 for the repairman to come out and I am sure I would have paid more for the valve if
... Read more
he provided it.
Thank you.
Thank you.
Read less
Was this helpful?
Thank you for voting!
at start of the wash cycle did not take in any water
5 of 9 people
found this instruction helpful.
-
wojciech from bayonne, NJ
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers, Wrench set
very easy old part out new part in direct replacement, fit right in and it is working. Great deal and about half of the price than ge website. Thank you.
Was this helpful?
Thank you for voting!
Damaged rinse agent dispenser
7 of 15 people
found this instruction helpful.
-
Ralph from McMinnville, OR
- Really Easy
- Less than 15 mins
Unscrewed old one and installed the new one.
Was this helpful?
Thank you for voting!
Did not fully drain water
3 of 3 people
found this instruction helpful.
-
Antoinette from TOMS RIVER, NJ
- Really Easy
- Less than 15 mins
-
Nutdriver
Looked up possible causes on your website. Website stated that more than 50% of time the cause was the piston and nut assembly. Removed the piston and nut assembly in bottom of unit behind screen on rear wall and saw that the gasket seal was completely gone . Ordered the part. took less than 10 minutes to install. Tested the unit and it d
... Read more
rained completely. Thank you as i was looking at a more difficult repair if the pump had to be replaced.Repair cost less than $20.00.Before changing piston and nut assembly I cleaned the strainer and sump. disconnected drain hose and checked for blockage . i than checked your website that listed the piston assembly as the culprit more than 50% of the time. Thanks again
Read less
Was this helpful?
Thank you for voting!
New home to me. Part lost
3 of 3 people
found this instruction helpful.
-
Harry from SAINT LOUIS, MO
- Really Easy
- Less than 15 mins
Put on a new cap.
Was this helpful?
Thank you for voting!
Dishwasher would not drain
4 of 6 people
found this instruction helpful.
-
Roberta from Bloomville, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
According to instructions with part
Was this helpful?
Thank you for voting!
Motor / Pump berrings out
4 of 6 people
found this instruction helpful.
-
Sheri from St.Cloud, MN
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
Ordered the new motor/pump here at parts select and with the easy directions I replaced in no time flat. Saved me $300.00 for a replacement.
Was this helpful?
Thank you for voting!
Dishwasher would not fill with water and switches on front panel would not work properly.
5 of 9 people
found this instruction helpful.
-
Richard from Blackfoot, ID
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
A short investigation revieled that one of the wires going to the malfunctioning switch was burnt and the connector had come loose from the switch assembly. The old assemble was replaced in a short period of time and all is well.
Was this helpful?
Thank you for voting!