- Home
- 36291201002
- Instructions
36291201002 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drip Bowels badly stained.
-
Dean from Hill, NH
- Really Easy
- Less than 15 mins
Unplug heating elements and pick up drip bowels and reinstall elements.
Other Parts Used:
Was this helpful?
Thank you for voting!
Burned heating coil
-
Maria T from Germantown, MD
- Really Easy
- Less than 15 mins
Just pulled old coil out of the plug. Replaced drip bowl and inserted new coil in. No problem.
Other Parts Used:
Was this helpful?
Thank you for voting!
needed new drip bowls for stovetop GE
-
Patricia from Centereach, NY
- Really Easy
- Less than 15 mins
removed the burners and dropped the drip bowls in. Very easy to do,
Other Parts Used:
Was this helpful?
Thank you for voting!
GE Electric Range rear left burner quit coming on
-
Richard from Richmond, TX
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Removed the back top cover with 1/4" nutdriver. Removed the burner terminal block with 1/4" nutdriver. Within 15 minutes had the terminal block kit removed and installed and in service.
Was this helpful?
Thank you for voting!
Needed to replace drip bowls
-
Gloria from Dallas, TX
- Really Easy
- Less than 15 mins
Husband just snapped in place in about 8 seconds! Thanks for the fast delivery and pleasant staff assistant.
Was this helpful?
Thank you for voting!
Plastic glide broke
-
Mary Ann from Granby, CT
- Really Easy
- Less than 15 mins
-
Screw drivers
The person I spoke to knew exactly what I was trying to describe. The part arrived in 2 days. 5 minutes later the drawer was back in place. I was glad I save the screw as the part did not come with one.
Was this helpful?
Thank you for voting!
Needed new drip pans
-
GAIL from STREAMWOOD, IL
- Really Easy
- Less than 15 mins
Not really a repair. But would like to say, I like the price and shipping was super fast. Thanks.
Other Parts Used:
Was this helpful?
Thank you for voting!
the bottom element of the oven was broken
-
DAVID from PARIS, MI
- Really Easy
- Less than 15 mins
attached the element,pushed it back in the pocket,put the plate back on, screwed the nut and bolt back on and was done in less than 4 minutes!!
Was this helpful?
Thank you for voting!
heating element blew apart
-
Lori from Bellows Falls, VT
- Really Easy
- Less than 15 mins
-
Nutdriver
I watched the video on this website and it couldn't have been easier. The only thing I did differently was I took the door off for an easier reach. To take the door off, you open just a little and pull up. It makes it so much easier to get at the screws, and maked the repair a snap.
Was this helpful?
Thank you for voting!
Burned out heating element
-
David from Alice, TX
- Really Easy
- Less than 15 mins
-
Nutdriver
took 5 minutes with a nut driver and son. I had previously watch your video and went exactly as the video described and showed.
Was this helpful?
Thank you for voting!
old,burned pans
-
James from Apache Junction, AZ
- Really Easy
- Less than 15 mins
replaced
Other Parts Used:
Was this helpful?
Thank you for voting!
Broiler Element Replacement
-
Emily from Snoqualmie Pass, WA
- Really Easy
- Less than 15 mins
-
Nutdriver
There were two small screws at the back of the stove (this was the part that intimidated me. At first glance it doesn't look like it should be removed). But you just have to unscrew them, disconnect the wires behind them (this part can be done by hand), and pull the element out. The new element slides right in! Just make sure the power to
... Read more
the stove is disconnected either by breaker or by unplugging it. I'm not sure if it matters, but I made sure to connect the wires to the same side of the element that they were removed from.
Read less
Was this helpful?
Thank you for voting!
Heating element not working
-
Stuart from Yelm, WA
- Really Easy
- Less than 15 mins
-
Nutdriver
Saw the brief video and as stated took less than five minutes to replace. It took longer to clean up the floor under the oven than to replace heating element.
Was this helpful?
Thank you for voting!
burned out
-
mary from morton, WA
- Really Easy
- Less than 15 mins
-
Nutdriver
replaced
Was this helpful?
Thank you for voting!
stained drip bowls
-
Sunny from Salt Lake City, UT
- Really Easy
- Less than 15 mins
unplugged burners replaced drip bowls plugged in burners
Other Parts Used:
Was this helpful?
Thank you for voting!