3627558 Kenmore Range - Instructions

All Instructions for the 3627558
16 - 30 of 69

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
old blackened oven racks
8 of 17 people found this instruction helpful.
  • Roger from Falls Church, VA
  • Really Easy
  • Less than 15 mins
Replaced old with new.
Was this helpful?
Thank you for voting!
Wife broke gas lines when trying to clean under hood
4 of 6 people found this instruction helpful.
  • Scott from Corinth, MS
  • Easy
  • Less than 15 mins
  • Wrench set
Removed old line with wrench and attached new line to gas valve first. Then lowered hood to the stop and attached gas line to burners.........very easy and works fine now.
Was this helpful?
Thank you for voting!
none
3 of 3 people found this instruction helpful.
  • Michael from Laughlin, NV
  • Very Easy
  • Less than 15 mins
slid the old ones out and slid the new ones in. done
Was this helpful?
Thank you for voting!
Oven will not preheat. Pulses on an off.
7 of 15 people found this instruction helpful.
  • Paul from San Francisco, CA
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Turned off the gas. Disconnected gas inlet, burner supply line and oven supply line from regulator. Unscrewed regulator from its bracket. Replaced with new regulator in reverse order and added teflon tape suitable for gas lines to all threads.

Unfortunately, the regulator was not the cause of the problem and the oven still do es not prehead - acts exactly the same.
Was this helpful?
Thank you for voting!
we had damaged the burner cap
4 of 7 people found this instruction helpful.
  • Gary from Indio, CA
  • Really Easy
  • Less than 15 mins
just removed the old burner cap and put on the new one.
Was this helpful?
Thank you for voting!
Grate Size
2 of 2 people found this instruction helpful.
  • Clyde from ALLEGAN, MI
  • Really Easy
  • Less than 15 mins
The grates are slightly smaller then the original Kenmore parts and they slide slightly. I purchased a full set of 4 grates - part number PS244182
Was this helpful?
Thank you for voting!
GOT 1-SMALL 2-MEDIUM 0-LARGE CAPS
2 of 2 people found this instruction helpful.
  • Teddy from Bel Air, MD
  • Difficult
  • Less than 15 mins
PLEASE BE ADVISED WHEN THEY SHIPPED THE BACK ORDER 1 -(taupe) LARGE CAP - RECEIVED 4 BLACK CAPS - 1-SMALL
2-MEDIUM 1-LARGE (ALL BLACK) - STILL LOOKING FOR
A LARGE CAP IN taupe color!

Received refund for 1-large cap
PROBLEM IS ALL OTHER PARTS ON THE GAS STOVE
ARE taupe in color - do not want black!