3612 - Overview

Models starting with 3612

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Defrost Timer - 120V 60Hz – Part Number: WR9X502
$118.26
Special Order
Defrost Timer - 120V 60Hz
★★★★★
★★★★★
(3)
Part #WR9X502
This defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, and the label is orange.
Garter Spring – Part Number: 654020-2
$7.44
On Order
Garter Spring
Part #654020-2
Included in part number 596141-3
Pan Head Screw M5X40 – Part Number: 911263-2
$7.44
Special Order
Pan Head Screw M5X40
Part #911263-2
Countersunk Head Screw M4X14 – Part Number: 251295-0
$7.44
Special Order
Pan Head Screw M5X80 – Part Number: 911944-8
$8.76
Special Order
Pan Head Screw M5X80
Part #911944-8
Pan Head Screw M5x40 – Part Number: 911261-6
$7.44
Special Order
Pan Head Screw M5x40
Part #911261-6
Genuine Makita replacement part. rnThis phillips pan-head screw includes a washer. It is sold individually.
Countersunk Screw – Part Number: 912107-9
$7.44
In Stock
Countersunk Screw
Part #912107-9
Genuine Makita replacement part, This item is sold individually. This screw is used mostly on the bases of the tool listed below. On the jig saws it is used to attach the Base Plate to the base. On the Router it is used to attach the Base Plate to the base On the Circular Saw it is used to attach the Depth Guide to the Base of the saw.
Countersunk Screw – Part Number: 912112-6
$7.44
On Order
Countersunk Screw
Part #912112-6
Genuine Makita replacement part, this item is sold individually. This screw is used on a variety of Makita tools. Use Phillips Head Screwdriver to tighten and loosen this screw. Follow appropriate safety practices when installing screw.
Hex. Nut M5 – Part Number: 931202-6
$7.44
Special Order
Hex. Nut M5
Part #931202-6
This item is available as an individual replacement part. The hex nut is made out of metal. A wrench might be helpful during the installation of this part. It might break or strip over time and will need replacing. This genuine item is supplied by the original equipment manufacturer for use with blowers, drills, grinders, nailers, rotary hammers, routers, sanders, saws, and trimmers made by Makita.
Flat Washer 5 – Part Number: 941101-4
$7.44
Special Order
Flat Washer 5
Part #941101-4
This item is a genuine Makita part that has been sourced from the original manufacturer to be used with trimmers, circular saws, sanders, routers, nailers, reciprocating saws, laminate trimmers, and planers. The flat washer is used with different types of power tools and the application of the washer can vary based on the model of the equipment. This item is available as an individual replacement part.
Flat Washer 6 – Part Number: 941151-9
$7.44
Special Order
Flat Washer 6
Part #941151-9
This is an authentic Makita replacement part that has been sourced from the original manufacturer to be used with circular saws, table saws, masonry saws, planers, demolition hammers, and angle cutters. The washer has multiple applications based on the model of the power tool. It is recommended to review your model's diagram to verify this washer's compatibility. The washer is sold individually.
Retaining Ring R-12 – Part Number: 962062-5
$7.44
Special Order
Retaining Ring R-12
Part #962062-5
It is a high-quality replacement part that is specially manufactured for use with Makita grinders. This retaining ring is used to secure the Pin 6, please make sure to check appropriate diagram of your model for correct location and use of this hardware. It is made of durable metal and it is sold individually, to remove this retaining ring it is best to use snap-ring pliers.

Exact Part matches for your search term

Gear – Part Number: 3612
No Longer Available
Gear
This part number matches the current model number 3612
Part #3612

Common Symptoms of models starting with 3612

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
refrigerator was not cooling but the freezer worked fine.
93 of 110 people found this instruction helpful.
  • Wanda from Cabins, WV
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
My husband put on the defrost timer. At first I thought the part was not going to fix the problem. After about 5 hours my refrigerator was still warm. I went to work and when I got home that evening my refrigerator was cooling and down to 28 degrees. So if you replace this part wait at least 12-24 hours. Give it time to stablize. My husband says it has to go through its cycle. It works on a 24 hour timer. My refrigerator is working fine and this has saved me alot of money. My husband says, once you put on the timer you may have to use a flat screwdriver and turn the small dial clockwise one click to start it. He removed the kick grill and replaced the part. Dont forget to shut breaker off to replace this part. Turn power back on and start the timer. We are so happy that we now have a working refrigerator.
Was this helpful?
Thank you for voting!
display showed dE
75 of 119 people found this instruction helpful.
  • Nancy from Hamburg, NY
  • Easy
  • Less than 15 mins
  • Nutdriver
popped off front grille, removed 2 screws for bracket, then had to remove one screw for timer. unplugged old timer, reversed procedure, all works.
Was this helpful?
Thank you for voting!
refrigerator would not defrost
21 of 23 people found this instruction helpful.
  • Donald from worthington, OH
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
Look were timer was located, in my refigerator is next to the dial to ajust the temperature. used a screwdriver to get panel off. replaced timer then used a straight screwdriver to advance timer to turn on compessor . monitor temperature . checked out.
Was this helpful?
Thank you for voting!