358351480 Craftsman Chainsaw - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
My neighbor brought the saw to me. It was locked up
4 of 4 people
found this instruction helpful.
-
Marvin from KIRBYVILLE, TX
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers, Wrench (Adjustable)
He didn't want to spend alot of money on it. So I got the jug (Head) off and sanded it and the piston down while I waited on the new piston ring to get here. I found that it was easier putting the new ring in and the piston back into the jug (Head) was to go ahead and take the piston out so you could turn the jug (Head) upside down and it
... Read more
slid right in. It didn't take no time at all. And it now runs as good as new
Read less
Was this helpful?
Thank you for voting!
Broken piston ring and tune up
4 of 4 people
found this instruction helpful.
-
Wade from HENDERSONVLLE, NC
- Easy
- 30 - 60 mins
-
Socket set
Straight forward, trick for the piston ring was to cut a soda can to make a sleeve that could be wrapped around the piston ring. A bit of duct tape with a tab held it shut until the piston was in position then it was easily removed as the piston was slid in.
Other Parts Used:
Was this helpful?
Thank you for voting!
I broke the original ring
4 of 6 people
found this instruction helpful.
-
Danny from STEVENSON, WA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
Took chainsaw apart and replaced the ring.
Was this helpful?
Thank you for voting!
Split fuel line driving brother-in-law to frustration
1 of 5 people
found this instruction helpful.
-
Howard from UNICOI, TN
- Really Easy
- 30 - 60 mins
-
Pliers
Seven screw, three case cover, two air cleaner, two carb mounting, pulled carb, drained tank, pulled old fuel line, treaded new one in, wire to thread, thread to angle cut fuel line. Reassemble, test, sharpen chain, retest…not exactly a doityourselfer, graduate degree in mechanical/industrial engineering and former medium/heavy mechanica
... Read more
l. Get fuel line on carb prior to reassembly, line may need some stretching with a tapered punch.
Read less
Was this helpful?
Thank you for voting!