25361112104 Kenmore Refrigerator - Parts

This manufacturer-certified Door Shelf Retainer Bar, sometimes otherwise known as the door rack or bar retainer, is a white, plastic part which can be easily installed onto the inside of the refrigerator or freezer door to hold items on the door shelves. It holds items in your fridge and will show physical damage if broken or warped, at...Read more which time it should be replaced. Check your user manual and model number to see if this part is right for you. No tools are required for this installation, the part should simply snap into place. This part measures roughly 25 inches wide, 3 inches high, and 5 inches deep. This part is sold individually, and we recommend checking the other door shelf retaining bars on your refrigerator or freezer at the same time as ordering this part to ensure that no others need to be replaced, as they often wear or warp at similar speeds.

This left-side drawer rail helps support the meat or deli pan in your Frigidaire fridge. If your drawer is sagging, stuck, or hard to open, this part can fix it. It’s a sturdy replacement that fits many models and works with the matching right-side rail (sold separately). Just check your model number to be sure it fits.

This defrost timer will cycle for thirty minutes after every eight hours of run time.

This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside your appliance. Installation is simple—just unscrew the old bulb and replace it with the new one. If the existing bulb is broken, disconnect p...Read moreower and use needle-nose pliers to safely remove the remaining base. Sold individually, this bulb is a commonly replaced part—consider keeping a spare on hand.

This defrost thermostat is a critical component in the refrigerator’s defrost system, designed to prevent overheating during the defrost cycle by regulating the temperature around the evaporator coils. Positioned within the freezer compartment, it monitors coil temperature and interrupts power to the defrost heater when safe limits are re...Read moreached. A malfunctioning thermostat may result in uneven cooling, excessive frost buildup, or a warm refrigerator compartment despite a cold freezer. Replacing this part restores proper defrost function and helps maintain consistent internal temperatures and energy efficiency.

This kit includes the motor, clips and terminal connectors. This part has been updated by the manufacture. This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.

Frost near the door, long cooling cycles, or a warm refrigerator can result from a cracked or twisted fresh-food door seal. The gasket forms a tight barrier between the door and cabinet, helping hold cold air inside. First check for spilled food, loose hinges, bent door parts, or shelves that stop the door from closing. Match the replacem...Read moreent to the full appliance model before ordering. Disconnect power and move food to a cooler during the repair. Smooth shipping creases with warm water or low heat, but do not overheat the material. Install the seal without stretching it, then test several spots around the closed door with a sheet of paper.

This part is attached to the compressor. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

This is the replacement meat pan for your refrigerator. It is made of clear plastic and is approximately 18 inches long and 13 inches wide. The meat pan slides into the bottom of the refrigerator shelf and is used to store meat and other food items. The main reason to replace the meat pan is if yours is cracked, damaged, or missing. To re...Read moreplace the meat pan, simply slide the old pan out, and slide the new one into place. This part is an OEM part sourced directly from the manufacturer, and is sold individually.

Keep your produce fresh and your refrigerator organized with this crisper pan cover, which includes the frame and insert. Positioned above the crisper drawer, it helps regulate humidity to prevent premature wilting of fruits and vegetables. The cover also protects drawer contents from spills and contributes to the overall structure of the...Read more refrigerator interior. This part is designed to fit select models—please verify compatibility before purchase.

If the back edge of your fridge shelf is missing a piece or looks worn out, this rear shelf trim is what you need. It’s about 24 inches long and 1 inch wide, made of sturdy white plastic, and fits right onto the back of the shelf. It helps keep things stable and gives your fridge a clean look. This updated part might look a little differe...Read morent from your old one, but it works just the same. No tools needed—just snap it into place.

This transparent plastic dairy door is designed to cover the dairy compartment in your refrigerator, helping to keep items like butter and cheese neatly stored and easily accessible. Measuring approximately 10 inches wide and 6 inches long, it offers a snug fit and a clean look. The lid lifts smoothly to access the contents inside, and in...Read morestallation is tool-free—simply clip the door into the hinged slots on the refrigerator. If your current dairy door is cracked or missing, this replacement offers a quick and simple way to restore functionality and maintain organization in your fridge.