All Installation Instructions for Kenmore Refrigerator 25360089413

Shelf was broken

Clicked in beautifully....no problems at all.

Parts Used:

Door Shelf Retainer Bar

Gay from Carlsbad, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Original plastic hinge cracked across the middle

Removed 2 hex screws & old hinge, placed new hinge on cabinet & found that it didn't fit; one hole was about 1/8" off. Had to drill a new hole in cabinet top in order to attach new hinge. Hinge works fine now. I'm glad to find the hinge is metal; original one was plastic.

Parts Used:

Upper Hinge

Al from Sarver, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Freezer door sagging due to warped hinge

Just block the door up so it doesn't fall off, remove the two screws, replace hinge, and replace screws. My wife could have done it. Metal replacement part is much better than the original plastic that warped from day one.

Parts Used:

Upper Hinge

Keith from Springfield, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Self retainer bar broke

Parts just snap on like Video said

Parts Used:

Door Shelf Retainer Bar

Lashawn from Akron, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Refrigerator door sagged, had to push the door to close it.

Used wood blocks to raise the door off the lower hinge bracket then unscrewed the suspect hinge. Cut a small shim, two layers of soda can, to place under the lower edge of the new hinge bracket and doubled the washers by using the old one to ensure I had adequate clearance for the door. After a little silicone lube I installed the new hinge bracket. All better now.

Parts Used:

Single Washer

Lower Hinge Bracket

Michael Jude from Saint Martinville, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

The Only Problem Was That The Part I Ordered Could Only Be Used On The Top And Second Shelf

The shelf was out too far to be used on the bottom shelf. The top shelf, which was not as deep was then moved to the bottom and it worked fine. I am wondering if the shelf that was not as deep as the part I received is available. Thank you - maxine

Parts Used:

Door Shelf Retainer Bar

MAXINE from GLENDIVE, MT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

Was this instruction helpful to you?

Thank you for voting!

broken crisper tray

Removed old tray and slid in the new ones

Parts Used:

Crisper Drawer

robert from edison, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

both retainer bars broke within the first year..

The new ones popped right in no problems

Parts Used:

Door Shelf Retainer Bar

George from Highland, KS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

The freezer door shelf retainer bar was broken

1.) Removed the old broken freezer door retainer bar. 2.) Removed the new freezer door retainer bar from shipping carton. 3.) Inserted new freezer retainer bar into place. 4.)Done is less than 4 minutes.

Parts Used: