25344723111 Kenmore Refrigerator - Instructions

The repair, if you want to call it that, was a complete no-brainer. The glass slipped right into the shelf. No tools were needed. I was afraid that the glass might break during shipment. However, it was packaged and secured several times over that it was in no danger of breaking during delivery. The part came sooner than I anticipated. I am extremely pleased with this order.

I got the serial / model number from my refridgerator inside wall. Saw your web site for parts. I loved your site as I couldn't read the whole model number as part was washed. Your site at photo's on the site and it matched perfect. I thought I would wait for weeks but my part came within 3 days at no extra shipping costs. All I had to do was take it out of box and pop it on the door. Excellent service! Thankyou.

"popped" on new shelf bin, threw away old broken one. replaced condiments, closed the refrigerator door and smiled.

New part just snapped on to shelf. Very easy to install.

Replaced fan. I ordered the fan and received it the following.(-:

When i found out there was no thread in brace where bolts were supposed to screw in, I panicked. I thought I would have to send part back or go to a machine shop to make a thread. I called a friend for help and he told me the bolts would make the thread if I just screwed them in. Sure enough, the bolts made the thread and then I just proceeded to instal motor and put refrigerator back together. It was simple.

Wasn't hard after I got the right part. Both left and right are decribed on order page as 42 and of course I order the (right)wrong side. Had to reorder (left)and got the correct side. Since the left side disintergated, I decided to keep the right side and replace both sides. Replacing was pretty much a breeze. Recently had to order a door shelf also. Replaced it in less than a minute. Delivery on these parts were great. Here in a matter of two days. Thanks parts replacement guys.

Ordered the part....arrived in less than 2 days and 2 minutes later...the salad dressing was back in its designated spot!!!

Insert the replacement glass shelf in my refrigerator. Installation was very easy and simple, no tools needed.

removed all food-------removed crisper bins------removed old crisper cover by lifting and sliding out.Installed new crisper cover.

easy

It locks into place.

fit right in no problem

Remove the cover panel inside the freezer, remove and replace the fan motor (pull fan blades off old motor and push on the new one) and replace the cover.

I unscrewed the screws that held the old fan on, disconnected the wiring harness and removed the old fan. I pulled the blades off the motor and put it on the new fan. One thing of note, the screw holes on the new fan weren't threaded. I assume this is by design, so I used the screws to thread the holes before installing it in the freezer. Once I did this, the rest of the installation was easy, just screw it back in and connect the wiring harness.