25344723101 Kenmore Refrigerator - Instructions

I had no problems. Screws arrived sooner than expected. It was a very simple installation. Very pleased with both the product and service.

snapped in new bin

I took the new part out of the box and snapped it into place, then I opened a bottle of champagne and celebrated.

I had to tap the screw holes with a 8/32 tap so that the screws would not bind.

Just snapped the piece in place. Fixed in less than 1 minute. The Lady on the phone was helpful in making sure I was selecting the right piece. Delivery was made in 2 days. I can't be more pleased. cw

Upluged power pulled freezer out from wall removed the two screws that holds the defrost timer unpluged defrost timer pluged new timer in mounted new timer back with the two screws pluged freezer back in and job was complete. Freezer working fine.

Replaced fan. I ordered the fan and received it the following.(-:

When i found out there was no thread in brace where bolts were supposed to screw in, I panicked. I thought I would have to send part back or go to a machine shop to make a thread. I called a friend for help and he told me the bolts would make the thread if I just screwed them in. Sure enough, the bolts made the thread and then I just proceeded to instal motor and put refrigerator back together. It was simple.

Just took old knob out put new knob in real easy thank you jd

I first noticed my ice cream getting soft. Then 2 days later the alarm went. I emptied the freezer, opened the panels and saw no frost. I saw that 99% of issues were resolved with a defrost timer and thermostat so I ordered those. I have to say the parts came quickly and they went in very easy. My freezer seems to be in the 1% category though. It's still not cooling even though I can measure the temperature at the front of the evaporator coil is cold but by the end of the coil it's almost room temperature. I think a repairman is called for.

Remove the cover panel inside the freezer, remove and replace the fan motor (pull fan blades off old motor and push on the new one) and replace the cover.

Unplugged freezer from electrical socket. Removed lower trays from freezer. Removed sound proof stripping from sides of back panel. Removed upper, lower and side screws from back, lower panel using No. 2 phillips screwdriver. Disconnected motor wires from quick disconnect power supply. Removed motor bracket from freezer back using nut driver. Removed motor from bracket using same nut driver. Replaced motor and screws in bracket. reattached quick disconnect. Attached fan blade to motor making certain to push blade on shaft securely. Replaced bracket to freezer back. Replaced back cover. Replaced stripping. Plugged into power supply. Total time 15-20 minutes.

Wasn't hard after I got the right part. Both left and right are decribed on order page as 42 and of course I order the (right)wrong side. Had to reorder (left)and got the correct side. Since the left side disintergated, I decided to keep the right side and replace both sides. Replacing was pretty much a breeze. Recently had to order a door shelf also. Replaced it in less than a minute. Delivery on these parts were great. Here in a matter of two days. Thanks parts replacement guys.

Ordered new shelf an it came in two days. Snapped right on. Very pleased.

I own an appartment building and it seems everytime someone moves out they leave broken appliance parts in their path. It is so easy to go on line with the model number and get the parts I need in just a few days. I snap them in place of the broken shelves and it looks like new. Thanks, this is a great spot to get just the piece I need.