25344309400 Kenmore Refrigerator - Parts

This single water filter is designed for use in side-by-side refrigerators, positioned in the front top-right section for easy access. It utilizes a carbon-based filtration system to reduce a wide range of contaminants, including cysts, turbidity, lead, mercury, and herbicides, ensuring cleaner water and ice from the dispenser. Measuring ...Read more6 x 3 x 7 inches and constructed from white plastic, the filter is engineered for performance and ease of replacement. Common symptoms indicating the need for replacement include reduced ice production, dispensing issues, leakage, and unusual noise. The filter should be replaced every six months or after 200 gallons of use, as indicated by the red light on the freezer door dispenser. Installation requires no tools: press the release button to remove the old filter, insert and lock the new one, then run water

This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can be used for the front and the rear support, as designed by the manufacturer, and mounts to the inside cabinet wall. Replacing this part is a...Read moren easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. If you cannot get the pin out you can use a flat-blade screwdriver to push it down and out of sight and it will not harm anything in your refrigerator After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.

This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to the inside cabinet wall. If there is visible damager or your crisper stops fitting properly, it may be time to replace the part. Check your us...Read moreer manual and model number to ensure this part is what you need. Replacing the rear crisper support in your refrigerator is an easy job. This part is made from plastic and mounts on the inside of the wall. To complete this repair you will need a small putty knife, a punch or a short flat blade screwdriver, and a small hammer. You may need to replace your rear crisper support if you find that the door will not open or close. In order to complete this repair, you will need to remove all the shelves above the crisper in order to have ample room to work. It is also good to have duct tape on hand, which can be used to protect the liner around the support. This part is sold individually. Please note that the rear and front crisper support are different parts; this is the one you are looking for if it is your rear support that needs replacing.

This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.

Sold individually. This cam is located at the bottom of the fridge/freezer door.

If your fridge door is hard to open or making strange noises, this small but important part could be the reason. This black plastic bearing fits at the bottom of the door and helps it swing open and closed smoothly. It reduces friction and keeps the door aligned, so your fridge works like it should. Replacing a worn bearing can fix squeaks, clicks, and other annoying issues.

This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside your appliance. Installation is simple—just unscrew the old bulb and replace it with the new one. If the existing bulb is broken, disconnect p...Read moreower and use needle-nose pliers to safely remove the remaining base. Sold individually, this bulb is a commonly replaced part—consider keeping a spare on hand.

This kit includes the clip, leads and one heat shrink.

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.

This 3.8-watt LED light bulb is designed to illuminate the interior of select refrigerator models, providing bright and efficient lighting when the door is opened. If your current bulb is dim, flickering, or no longer functioning, replacing it will restore visibility and convenience. Installation is simple—unplug the refrigerator, unthrea...Read mored the old bulb, and screw in the new one. This bulb is sold individually and does not include additional components.

This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity control slide, and this component is now sold separately. The crisper drawer is designed to store produce at a humidity level that ensures yo...Read moreur food is kept fresh for as long as possible. It is commonly replaced because it is cracked, warped, or stained. For this simple tool-free repair, start by opening your refrigerator door and sliding out the old crisper drawer. Take your new crisper drawer and align the thin ridge on the top of the drawer with the track located inside the refrigerator. Slide the new part into place and your repair is complete.