25331420100 Kenmore Refrigerator - Instructions

I had to cut the retainer bar to length and then snap the end caps onto the bar. Then just snap the assembly onto the freezer. No problem!

Simply clipped it on.

none

Just snaps into notches on each side. Bar arrived bent from shipping. Replacement was overnighted at no extra charge. Great service.

I looked at the model number and ordered it through the part select. The delivery was real fast and convenient. Overal we had a very good experience with "Part Select"

Remove and replace.

I took the broken plastic cap off and put the new one onto the retaining bar. Then snapped the the bar into place. That was it!

Removed front low grill, removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires. Reversed process to install new timer.

replaced door hardwear

I snapped out the broken piece of the old Door Shelf Retainer Bar End Cap, snapped in the new one and reinstalled the door rack in my refrigerator.

Just popped the new piece into place.

measured lenght of parts looked at parts available and matched the size and use together slip broken part off door replaced with newpart. reinstall retainer to to door no tools needed.

Not much placed the 2 ends on the straight bar & put it in place on the refridgerator door dom russo

Popped off the old and slipped on the new. No tools - in less than 5 minutes.

Need to repair refrigerator for new renters. Ordered parts and received them two days later. Installed retainer bar with end caps into refrigerator door same day parts received.