- Home
- 25326432103
- Instructions
25326432103 Kenmore Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Freezer would constantly run. Even when it was super cold inside.
-
David from San Marcos, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
I ordered a new thermostat and installed it in less than 15 minutes. Looks like the problem is fixed. Now ,the freezer cycles on and off correctly. The part was ordered on a Monday and I got it the next day. I am very satisfied.
Was this helpful?
Thank you for voting!
thermostate stop working frozzen up
-
Augusto from Gretna, LA
- Really Easy
- Less than 15 mins
-
Nutdriver
just like the video show sa 1,2,3 yeaaa thanks
Was this helpful?
Thank you for voting!
Needed a freezer key
-
Nancy from Star Lake, NY
- Really Easy
- Less than 15 mins
We really didn t need to do a repair, we just ordered a freezer key that we didn t have. I must say the shipping was fast we received it the next day. It was worth the shipping charge. We will be ordering again. Great service.
Was this helpful?
Thank you for voting!
freezer door got locked and we couldn't find the key
-
Linda from Fresno, CA
- Really Easy
- Less than 15 mins
inserted key and turned
Was this helpful?
Thank you for voting!
won't start repaced the run capacitor didn't solve the problem so I ordered a defrost timer
-
Curtis from Winlock, WA
- Really Easy
- 15 - 30 mins
I watched the videos (they really help) and followed the steps. Everything went smooth with no surprises
Was this helpful?
Thank you for voting!
When I was ready to instal fan motor, I noticed that there was no thread where I was supposed to screw in the bolts
-
hector from los fresnos, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers, Wrench set
When i found out there was no thread in brace where bolts were supposed to screw in, I panicked. I thought I would have to send part back or go to a machine shop to make a thread. I called a friend for help and he told me the bolts would make the thread if I just screwed them in. Sure enough, the bolts made the thread and then I just proc
... Read more
eeded to instal motor and put refrigerator back together. It was simple.
Read less
Was this helpful?
Thank you for voting!
freezer not cooling
-
Shawnda from Union City, PA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
inspected visible refrigeration lines for evidence of leaking, found nothing substantial that would cause concern, ordered capacitor and defrost thermostat simply because both are inexpensive parts and theoretically either could be causing the problem. Both parts were very simple to install especially since I am a semi-retired refrigerat
... Read more
ion man.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
My freezer quit working. The power light was on but nothing worked.
-
Carl from Peyton, CO
- Really Easy
- 15 - 30 mins
-
Nutdriver
I paid about $50 for a tech to come to the house to troubleshoot the freezer. He id'd the temp control unit in about 30 minutes and told me he could repair the freezer for an additional $300 or so. I told him 'no'. I looked up the part number with partselect and ordered the temp control unit for about $40 including shipping. I simply plug
... Read more
ged in the unit and reset the rear compartment panel and gaskets. I plugged the unit in. The freezer ran but did not freeze. I inspected the rear of the freezer and found that the tech had left the compressor unplugged. I connected the compressor and turned the freezer on, It is working just fine.
Read less
Was this helpful?
Thank you for voting!
Noisy fan
-
CRAIG from PRESCOTT VALLEY, AZ
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Remove the cover panel inside the freezer, remove and replace the fan motor (pull fan blades off old motor and push on the new one) and replace the cover.
Was this helpful?
Thank you for voting!
unit dead except for the light
-
David from Grayson, GA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Found voltage coming into unit but not making it through the control unit. Thermo switch could easly be bypassed with no results so only thing left was the control mod. It was worth the $51.00 guess , ordered the part with credit card about noon, the next day Fed Ex came to the door about 2 PM the freezer was running by 2:30. Very impress
... Read more
ed by everyone envolved. Spent the rest of the day bragging about my repair ability. Felt good to hear that baby fire up. Thanks again
Read less
Was this helpful?
Thank you for voting!
Evaporator Fan Motor was making loud rattling sound.
-
Richard from Clovis, NM
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Unplugged freezer from electrical socket. Removed lower trays from freezer. Removed sound proof stripping from sides of back panel. Removed upper, lower and side screws from back, lower panel using No. 2 phillips screwdriver. Disconnected motor wires from quick disconnect power supply. Removed motor bracket from freezer back using nut dri
... Read more
ver. Removed motor from bracket using same nut driver. Replaced motor and screws in bracket. reattached quick disconnect. Attached fan blade to motor making certain to push blade on shaft securely. Replaced bracket to freezer back. Replaced back cover. Replaced stripping. Plugged into power supply. Total time 15-20 minutes.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Freezer only cold on bottom
-
Richard from Warren, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
Pulled freezer out from where located to allow shelves to be removed.Unplugged unit, removed shelves and evaporator cover, installed new fan motor. Plugged unit up to check fan motor operation. Reassembled unit, installed shelves and moved freezer back into original location.
Other Parts Used:
Was this helpful?
Thank you for voting!
Freezer would not keep running and the temperature was too warm.
-
Edmond from Carroll, NH
- Really Easy
- 15 - 30 mins
-
Screw drivers
Followed the sites instructions. Empty the bottom part of the freezer. Remove the screws. Move the panel out of the way. Easily remove the old part and replace with the new. Put the panel and screws back in place. The freezer works.
Was this helpful?
Thank you for voting!
Freezer ran alot, then temperture began to vary.
-
John from Port Republic, VA
- Easy
- 15 - 30 mins
-
Screw drivers
Watched video on Part Select which shows you how to replace the thermostat with several good pointers. Very easily done and now the freezer works great.
Was this helpful?
Thank you for voting!
Freezer freezes up; lower unit to warm
-
David from Front Royal, VA
- Easy
- 15 - 30 mins
-
Nutdriver
Replaced freezer defrost thermostat. Unit worked perfectly.
Was this helpful?
Thank you for voting!